background image

RECHARGING

Recharge every 30 days and after each use. Failure to do so will result in possible damage to the internal 
battery and result in poor performance or failure to work at all.

    1.   Plug the AC Charging Cord supplied into the 120 Volt-in connection on the back  

 

        of the Booster Pack.
    2.   Plug the other end of the cord into a 110/120-volt AC outlet.
    3.   The Yellow charging LED light will glow and will remain ON during the charging  

 

        process. When the internal battery is completely full the Green FULL CHARGE
        LED light on the control panel will turn on automatically. This can take up to 72    
        hours depending on the condition of your internal battery. You can unplug your AC    
        Charging Cord at this time OR leave it plugged in indefinitely as the
        CUL™ listed internal charger is float charge equipped to maintain the internal battery.
    4.   You can also charge the unit from your 12 volt power outlet in your vehicle  

 

        by plugging one end of the DC charging cord into the Booster Pack 12 Volt DC
        power outlet and the other end into your running vehicle’s cigarette lighter.

          IMPORTANT: Your BATTERY LEVEL can be at a HIGH CHARGE STATUS       when you push your red  

 

          Battery Level Test Button       . This does not necessarily indicate that the battery is FULLY CHARGED.
          To be at the “Full Charge Level” the Green FULL CHARGE light on the control panel       will turn on    
          during the charging process indicating FULL CHARGE status.

PERFORMANCE GUIDELINES

For best results when using your Booster Pack:

    • Clean the battery terminals or posts before connecting the clamps to the vehicle
       battery. Use a battery post cleaner brush to remove corrosion from the battery
       terminals or posts. Two QuickCable cleaners are recommended for cleaning
       terminals, posts and cables. Solutions 510420 and 510430 will neutralize the  

 

       gray/white powdery corrosive material (see quickcable.com for more information).

          WARNINGS: Possible explosion hazard. Contact with battery acid may cause severe burns and  

 

          blindness. KEEP OUT OF REACH OF CHILDREN.

    • Always wear safety glasses when working with or around lead acid batteries.
    • If splashed by battery acid, immediately flush the area of the splash with clean 
         water; if a burning sensation is felt or any blistering occurs, seek medical help. 
       If acid is splashed in the eyes, flush eyes with clean water continuously and seek  

 

       medical help.
    • All lead acid batteries generate hydrogen gas during normal operation. This process  

 

       increases during a rapid discharge period such as when using for jump-starting.  

 

       Hydrogen gas and battery acid (sulfuric acid) can be:

        • Explosive   

 

 

 

 

• Poisonous to breath  

        • Corrosive and will burn skin, eyes and hair  • Highly flammable 
        • Damaging to unprotected metals  

 

• Damaging to natural fiber clothing

To avoid exposure to battery acid or the possibility of an explosion:

    • Follow all instructions in this manual and your vehicle’s manual.
    • Only use your Booster Pack in a well-ventilated area.
    • Observe all warnings.

6

7

14

6

Содержание BOOSTER PACK 950









Отзывы: