Antenna Installation
Step 2 :
Screw in the SMA Connector from the Indoor Directional Antenna
into the wireless device
Step 3 :
After the Indoor Patch Antenna is attached to the wireless
device position the Indoor Patch Antenna vertically to the
desk or wall and choose the optimal location for extending the wireless
coverage area and best performance.
** For desk mount, recommend to place the included rubber footing for a firm placement.
Antenna
Connector
(RPSMA-plug)
Device
Connector
(RPSMA-jack)
Remove and unscrew counter-clockwise
Step 1 :
Remove one default antenna from the wireless device by unscrewing
if from the base and start to assemble!
Screw in clockwise the
Reverse SMA plug
Caution
Before installing the Indoor Patch Antenna please make sure the wireless
device antenna either from the Wireless Access Point, Wireless Router,
Wireless PCI Card, Wireless USB Adapter....etc is removable by examining
the base of the antenna to see if it is a screw on type. Please do not force
off an antenna as it will damage the wireless transmission
02
* If your Wireless Router/Access Point has two antennas, it is better not to remove the
second antenna. For optional performance, two High-Gain Antenna should be used,
pointed to different directions.
