Repotec RP-WA2300, Руководство пользователя

Страница: 24 / 41

Backup/Restore Setting / Firmware Upgrade and Reboot -
In Management section, you can Backup/Restore Setting, Firmware
Upgrade and Reboot the system in following pages.
z
Backup the current settings to a file – Click on the “Backup” button,
system will prompt you where to save the backup file. You can choose the
directory to save your configuration file.
z
Restore settings from a backup file – Here you can restore the
configuration file from where you previous saved.
z
Restore factory default setting – Be very carefully before restore
system back to default since you will lose all current settings immediately.
If you act the function, the ip address will restore the establishing value
situation.
192.168.1.20 in the IP Address field and 255.255.255.0 in the
Subnet Mask field,
z
Firmware Upgrade – Enter the location of the firmware upgrade file in
the file path field, or click the “Browse” button to find the firmware
upgrade file. Then click on the “Upgrade” button, and follow the
on-screen instructions. The whole firmware upgrade process will take
around 60 seconds. Before upgrade, make sure you are using correct
version. Double check with your technical support service if available.
2 4