Repotec RP-UPH103R, Руководство пользователя

Страница: 9 / 29

4. Inverter LED (green): To indicate the UPS is powered through inverter.
5~9. Load & Battery Capacity LEDs:
(a) No. 5 to 8 LED is green color and No. 9 (used as warning LED for
overload or battery low) is yellow.
(b) These LEDs show the load % of the UPS if the mains power is
available (in normal operation). LEDs light up to indicate the
following information.
No. 5 LED: 0-25 % No. 5&6&7&8 LEDs: 76-100 %
No. 5&6 LEDs: 26-50 % No. 5&6&7&8&9 LEDs: Overload
No. 5&6&7 LEDs: 51-75 %
(c) In the battery operation, the LEDs indicate the capacity (%) of the
batteries. LEDs light up to indicate the following information.
No. 9 LED: 0-25 % (battery low level)
No. 8&9LEDs: 26-50 % No. 6&7&8&9 LEDs: 76-95 %
No. 7&8&9 LEDs: 51-75 % No. 5&6&7&8&9 LEDs: 96-100 %
10. Fault LED (red): To indicate the UPS is in fault condition because of
inverter shutdown or over-temperature
11. OFF key: It should be pressed with the control key simultaneously to
switch off the UPS.
12. Control key: this key is pressed simultaneously with OFF or
ON/TEST/MUTE key to switch on/off the UPS, do auto-test and disable
the buzzer.
13. ON/TEST/MUTE key: It should be pressed with the control key
simultaneously to switch on UPS, do UPS auto-test in normal AC mode
and turn off the buzzer in battery operation.
8