2
Installation Steps
1. Use the power cord to power up the PoE switch, and the LED indicator “Power”
will be on.
2. Connect “
UPLINK
” port of the PoE switch to other LAN switch via Ethernet
Cat.5e/6/7 cables. The LED indicator “UPLINK” will be on.
3. Connect “
LAN
” ports of the PoE Switch to PoE PD devices. The corresponding
LED indicators “
LAN
” and “PoE” will be on.
4. Check whether the PoE PD device is on. If not, please make sure all Ethernet
cables are connected correctly and fastened tightly.
LED Indicators
On the front panel of PoE Switch, there are 10 LED indicators as the following;
POWER:
“
Green On
” indicates power is on and normal.
UPLINK:
“
Green On
” indicates Ethernet is in connection at 10/100M.
“
Green Flashing
” indicates Ethernet in data activities.
LINK:
“
Green On
” indicates Ethernet is in connection at 10/100M.
“
Green Flashing
” indicates Ethernet in data activities.
PoE:
“
Green On
” indicates Power over Ethernet function is enabled.
“
OFF
” indicates the PoE is disabled, and it becomes a regular LAN port.
