4
Dip switch function
This unit is equipped with dip switches, located on the front panel. Adjusting the dip switches
will change the default function of this unit. This unit has set to manufacturer default as: SFP
speed 1000M.
The table shown as you may change the dip switch setting to your desired environment.
LED indicator
PWR (Green)
ON – Power is detected
OFF – Power is not detected
SFP Lnk/Act (Green)
ON – FX port is detected
Flashing – FX data is
transmitting/receiving
Lnk (Green)
ON – TX link is detected
Flashing – TX data is
transmitting/receiving
PoE (Amber)
ON – PD is detected on
designated port
OFF – no PD is detected
