LEDs Definition
The switch contains one power LED for the device,
Link/Act LED for each port that shows the activities and
information of the ports.
Please refer to the following table for LEDs definition:
LED
Status
Operation
Power
Steady Green
The switch is powered on
Off
The switch is powered off
Link/ ACT
Steady Green
Valid port connection
Blinking Green
Valid port connection and
there is data transmitting/
receiving
Off Port
disconnected
Loop
Blinking Red
Loop is detected
Off
Loop is not detected
4
Station Connection
Connect each station to the switch by twisted-pair cable.
Plug one RJ-45 connector into a RJ-45 port of the switch,
and plug the other RJ-45 connector into the station’s
network adapter. Power on the switch and then system is
ready.
Switches Connection
In making a switch interconnection, you could use any
port to connect another switch with straight or crossover
cable. As all the ports support auto MDI / MDI-X function,
using a straight cable to make a switch-to-switch
connection is allowed.
For cable selection, refer to the following table
烉
Network Speed Cable Type
Max. Length
10Mbps
Cat. 3, 4, 5 UTP/STP
100 meters
100Mbps
Cat. 5 UTP/STP
100 meters
1000Mbps
Category 5e, 6
UTP/STP
100 meters
[Note]
To make this switch perform well, we strongly
recommend below installation environment:
1. The switch is placed with appropriate ventilation
environment. A minimum 25mm space around the unit is
recommended.
2. The switch and the relevant components are away from
sources of electrical noise such as radios, transmitters and
broadband amplifiers.
3. The switch is away from environments beyond
recommend moisture.
5
Product Specifications
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3x full duplex flow control and
back-pressure for half duplex
IEEE802.3az Energy Efficient Ethernet
IEEE 802.1p QoS
Interface
8* 10/100/1000 Mbps RJ-45 ports
Network
Data Rate
10/100/1000 Mbps Auto-negotiation
Transmission
Mode
10/100Mbps: Full-duplex, Half-duplex
1000Mbps: Full-duplex
Switching
Capacity
16Gbps
Switching
Forwarding
Rate
11.9Mpps
Buffer
Memory
256K bytes
MAC Address
Table
8K
Jumbo Frame
9K bytes
Temperature
Operating: 0°C ~ 40°C (32°F ~104°F)
Storage: -20°C ~ 70°C (14°F ~158°F)
Humidity
Operating: 10% ~ 90% RH,
non-condensing
Storage: 5%~90% RH, non-condensing
LED
Indications
System: Power
Ports: Link/Act
Loop: Loop detection
Power Supply
Internal power supply 5V
EMI
FCC, VCCI, CE Class B, LVD
6
