REPLIGEN XCell C410:V3 Скачать руководство пользователя страница 10

Страница: 10 / 69

XCell™ C410:V3 Controller

User Guide

10 repligen.com UG-C410v3-06

1.2

XCell ATF® Device control scope and objectives:

The XCell™ C410:V3 Controller provides the process control functionality of the XCell ATF® 4, XCell

ATF® 6, and XCell ATF® 10 Devices.

XCell™ C410:V3 Controller is designed to:

Control ATF flow rates in both pressure and exhaust phases.

Provide a user interface capability for XCell ATF® Device control and monitoring.

Set-up and select operation parameters.

Display real-time process data.

Alarm for error conditions.

Provide batch control and user hierarchy.

Have PLC software upgrades in the field by replacing memory modules.

Have two major components, an Electronics Box (E-Box) and a Pneumatics Box (P-Box).

Allow the E-Box to operate an XCell ATF® 4, XCell ATF® 6, or XCell ATF® 10 Device using
specific software and modules.

10.

Allow the P-Box hardware and process parameters to be specific to the size of the particular
XCell ATF® Device being controlled.

Table 1. XCell ATF® pump housing and controller pairings

XCell ATF®

pump housing

XCell™ Controller

Description

XCell ATF® 4 Stainless

Steel

XCell™ C410:4V3

XCell™ C410:V3 C410 Controller for XCell ATF® 4

Device with air tubing.

XCell™ C410:4V3-GMP

XCell™ C410:V3 C410 controller for XCell ATF® 4 Device

with air tubing and standard GMP documentation and

FAT.

XCell™ C410:4V4B-GMP

Profibus configured XCell™ C410-V4B Controller with

power separation for XCell ATF® 4 Device with air

tubing, standard GMP documents and FAT.

XCell ATF® 6 Stainless

Steel and Single-use

XCell™ C410:6V3

XCell™ C410:V3 C410 Controller for XCell ATF® 6

Device with air tubing.

XCell™ C410:6V3-GMP

XCell™ C410:V3 C410 Controller for XCell ATF® 6

Device with air tubing, standard GMP documents and

FAT.

XCell™ C410:6V4B-GMP

Profibus configured XCell™ C410-V4B Controller with

power separation for XCell ATF® 4 Device with air

tubing, standard GMP documents and FAT.

XCell ATF® 10

Stainless Steel and

Single-use

XCell™ C410:10V3

XCell™ C410:V3 C410 Controller for XCell ATF® 6

Device with air tubing.

XCell™ C410:10V3-GMP

XCell™ C410:V3 C410 Controller for XCell ATF® 10

Device with air tubing, standard GMP documents and

FAT.

XCell™ C410:10V4B-GMP

Profibus configured XCell™ C410-V4B Controller with

power separation for XCell ATF® 10 Device with air

tubing and standard GMP documentation and FAT.

Содержание XCell C410:V3






































































Результаты поиска

Содержание XCell C410:V3

Отзывы:

Похожие инструкции для XCell C410:V3

Бренды по названию

Популярные бренды

REPLIGEN XCell C410:V3, Руководство пользователя

Результаты поиска

Содержание XCell C410:V3

Отзывы:

Похожие инструкции для XCell C410:V3

Бренды по названию

Популярные бренды