Cable/Satellite Box
Television
AUDIO
IN
OUT
V IDE O
R
L
S -V IDE O
OUT
S E R IAL
AUDIO
V IDE O
R
L
V HF /UHF
IN
IN
S -V IDE O
ReplayTV
Incoming
cable
Front of cable/satellite box
Serial cable (satellite receiver only)
Coaxial cable
A/V cable
IR blaster cable
A/V cable
1
3
Plug in ReplayTV and Complete
the On-screen Setup
IR B LAS T E R
DIG IT AL AUDIO OUT
T E L LINE
S E R IAL C ONT R OL
V G A
IN
OUT
IN/OUT 2
S -V IDE O
IN 1
IN 2
OUT 1OUT 2
V
ID
E
O
R
-A
U
D
IO
-L
E T HE R NE T
ANT /C AT V
IN
FR OM ANT.
OUT
T O T V
For TVs or
monitors with
VGA input
For components
with Digital
Audio Input
Ethernet cable
2
Coaxial cable (no cable box)
4
a
or
or
5
Router/Hub/Switch
4
b
Telephone cable
Take Inventory
Make sure you received the following items:
• ReplayTV Digital Video Recorder
• Coaxial cable
• A/V cable
• S-Video cable
• Ethernet cable
• Telephone cable
• Infrared (IR) blaster cable
• Serial cable
• 9-pin to 15-pin serial cable adapter*
• RJ H to 9-pin adapter*
• ReplayTV remote control with two AA batteries
• User's Guide
• Registration Card
* Use if the serial cable is not compatible with your satellite receiver.
Note: You may not need to use all of the cables provided. This depends on
the types of connectors on your television and if you have a cable box or a
satellite receiver.
Before you Begin
1. If you will be connecting ReplayTV to a home network, make sure you
have an available network connection.
2. Install the batteries in the ReplayTV remote control according to the
diagram inside the battery compartment.
Connection overview
ReplayTV controls and records the television signals you receive (satellite,
cable, antenna or a combination of all three). The signal(s) connect directly
to the ReplayTV inputs. The outputs from ReplayTV connect to a television,
monitor, or A/V receiver.
The ETHERNET and TEL LINE connectors are used to receive your program
listings from the ReplayTV Service
™.
The ETHERNET connection is also
used to incorporate ReplayTV into your home network.
GETTING STARTED
Refer to the user's guide for connection options not found on this Quick Setup Guide
and for information on incorporating ReplayTV into your home network
2
If you connect a cable box or satellite receiver to
ReplayTV, you need to attach a controller cable so
ReplayTV can change the channels on these devices.
The controller, either the serial cable or the IR blaster
cable, acts as a remote control for these devices.
• If your satellite receiver has a SERIAL
connector, connect the serial cable from this
connector to the SERIAL CONTROL connector
on ReplayTV.
• If your device does not have a SERIAL
connector, or if you have a cable box or
EchoStar satellite receiver, use the supplied
IR blaster:
1. Plug the IR blaster cable into the IR BLASTER connector
on ReplayTV.
2. Peel off the protective cover on one of the IR blaster
cable emitters.
3. Affix the emitter directly over the IR detector on the
cable box or satellite receiver.
4. Hide the unused emitter behind the equipment.
Refer to the user's guide for more information.
Attach Cable Box/Satellite
Receiver Controller
3
Connect the supplied A/V cable from the OUT
connectors on ReplayTV to the Audio/Video IN
connectors on your television, matching like colors.
Note: If your television has an S-Video IN connector,
connect an S-Video cable from the S-Video OUT
connector on ReplayTV to the S-Video IN connector on
your TV. Then, connect the audio cables (red and
white) from the OUT 2 R and L AUDIO connectors on
ReplayTV to the Audio IN connectors on your TV.
The VGA and DIGITAL AUDIO OUT outputs are for TVs
or monitors with compatible inputs. If you use the
VGA output, you still need to connect the yellow
video cable for the first-time Quick Setup
Connect ReplayTV to your TV
4
ReplayTV allows you to use either a broadband connection
(ETHERNET connector) or modem connection (TEL LINE
connector) to connect to the ReplayTV Service for daily
updates of your Channel Guide-–a collection of program
listings from your satellite, cable, or local television provider.
New features are also sent to your ReplayTV using these
connections.
You can also incorporate ReplayTV into your home network,
which allows you to use the in-home and Internet sharing
features, and the photo viewer feature. Refer to "Home
Network Connections" in the user's guide for more
information on system setup. (Note: You can only send
recordings to other ReplayTV 4000 or 4500 series users if you
use the ETHERNET connector.)
If you are using a broadband connection,
connect
the supplied Ethernet cable to the ETHERNET
connector on ReplayTV and to your home network.
If you are using a telephone line (not
connecting to
a network), connect the supplied telephone cable
Connect ReplayTV to a Network or
Telephone Line
Easiest Connection to your TV
The dashed coaxial cable shows the easiest way to
connect ReplayTV to your television. If you have a cable
box or satellite receiver you will still need to perform
Steps 2-5.
If your components have A/V or S-Video outputs it is
recommended that you take advantage of these
connectors, which supply better audio and video quality.
1
•
If you have a cable box:
Connect a coaxial cable from the OUT connector on
your cable box to the IN FROM ANT connector on
ReplayTV.
Or
If your cable box has Audio/Video OUT connectors,
connect an A/V cable from these connectors to the IN
connectors on ReplayTV. You do not need to connect
the coaxial cable if you choose this option.
Connect Incoming Signal to ReplayTV
•
If you have a satellite receiver:
Connect an A/V cable from the Audio/Video OUT
connectors on your satellite receiver to the
Audio/Video IN connectors on ReplayTV.
Note: If your cable box or satellite receiver has an
S-Video OUT connector, connect an S-Video cable
from this OUT connector to the S-Video IN connector
on ReplayTV. (The S-Video cable provides better
picture quality than the yellow video cable.) Then,
connect the audio cables (red and white) from your
cable box or satellite receiver to the
IN 2 R and L AUDIO connectors on ReplayTV.
For more help call Customer Care
800-933-5899
© 2002 SONICblue, Inc. P/N 41005010
5
IMPORTANT: All other connections must be done
before turning on ReplayTV.
1. Plug the ReplayTV power cord into an electrical
outlet.
2. Turn on your television and other components.
3. Press the ReplayTV POWER button on the remote
control. Note: It will take a few minutes for ReplayTV
to start up. You should see the following screen:
4. Follow the on-screen instructions to complete
the setup and begin using ReplayTV.
If you do not see the Quick Setup screen, try one of these
tips:
• Make sure the power light is illuminated on the
ReplayTV front panel. (If not, press the ReplayTV
POWER button on the remote control.)
• Press the TV/VIDEO or INPUT button on your TV
until the screen displays.
• Tune your television to the channel that
displays auxiliary INPUT. (Refer to your TV
owner's manual.)
• Recheck your connections.
• Refer to "Troubleshooting" in the user's guide.
Before continuing, please make sure all accessories are
connected to ReplayTV and your home network
connection is on.
Use the directional arrows to highlight an
on-screen option.
Press SELECT to choose an option and
continue.
Navigating ReplayTV
Begin Quick Setup
4a
4b
