Replay XD 1080 Mini, Быстрый старт

Страница: 3 / 14

R ECO R D I N G
Press A to Power On/Power Off. Press B to START/STOP Recording. You’re Done.
Power On (Standby & Mode Setting Selection):
Hold down front button (A) for 2 sec. & release, the Replay
XD 1080 Mini will vibrate 3 times & illuminate the blue power LED.
Note: Camera will turn off after 5 seconds if no SD card is present. Camera will turn off after 5 minutes of no activity.
Start Recording:
Hold down rear button (B) for 2 sec. & release, the Replay XD 1080 Mini will vibrate 3 times,
illuminate the red LED & automatically start recording or capturing.
Note: The red LED on the rear will blink when the memory card is not inserted properly. Make sure the memory card
is fully inserted with the gold contacts face-down unttil it clicks. Use only Replay XD approved SD cards.
Visit www.replayxd.com for SD card compatibility list.
Stop Recording: Hold down the rear button (B) for 4 sec. & release, the Replay XD 1080 Mini will vibrate 1 time to
notify you that it is saving the file.
Power Off:
Hold down the front button (A) for 4 sec. and release, the Replay XD 1080 Mini will vibrate 1 time &
power off.
Note: The power button will not function when recording. This is normal to prevent accidental powering off.
Clip File (Available in Advanced text File):
While recording quickly press the rear button (B) and release, the Replay XD
1080 Mini will vibrate 1 time to notify you that it is clipping & saving the file, then automatically starts recording. This feature
allow you to start a new file without starting or stopping the recording.
G F
A B