25 x 40 x 4.5
Table frame
4 x (40 x 200 x 1800mm)
Ground L evel
60 x 110 x 880mm
Cross Arm
740
m
815 mm
830 mm
440
180
680 mm
310 mm
700
SIDE VIEW
END VIEW
LBS-1800FS/WCA
WHEELCHAIR ACCESS
LYREBIRD
FREE STANDING
SETTING WITH
1800 mm
Страница 1: ...efore drilling pilot holes 6 Insert crossarm into the support lugs Then using approx 4 5mm drill bit drill a pilot hole into crossarm and secure using 65mm bugle screw NOTE Use a spirit level to ensure that all legs are square before drilling pilot holes BENCHES 1 Place bench slats face down on a flat surface 2 Attach bench supports to the 40x90mm slats using the 75mm hex head screws 3 Once all sc...
Страница 2: ...x 40 x 200 x 1800mm Ground L evel Ground L evel 60 x 110 x 880mm Cross Arm 740 m m 815 mm 830 mm 440 mm 180 180 680 mm 310 mm 700 m m SIDE VIEW END VIEW LBS 1800FS WCA WHEELCHAIR ACCESS LYREBIRD FREE STANDING SETTING WITH 1800 mm ...
Страница 3: ...tion diagram Place the supports of the assembled setting into the holes Position the setting and ensure that it is well braced to prevent movement and sagging At this stage it is important to use a spirit level to check that the top is horizontal and the supports are vertical Once satisfied that the setting is positioned correctly fill the holes with concrete making sure it is packed firmly around...
Страница 4: ...mm SIDE VIEW Table only LBS 1800IG WCA LYREBIRD IN GROUND SETTING WITH WHEELCHAIR ACCESS 630 mm 740 mm 640 mm 700 mm 685 mm 880 mm 685mm Ground L evel Ground L evel Ground L evel 815 mm 440 mm 310 mm 490 mm END VIEW 1800 3 x 40x90x1800 SIDE VIEW Bench only ...
