REPA PLH-E100, Инструкция по эксплуатации

Страница: 2 / 4

2
SPECIFICATIONS
Model PLH-E100
Voltage Rating
AC 100V to 240V, 50/60Hz
Energy Consumption <5 watts
Size H 5.1”xW4.1” x D 2.36
Weight 8.8 oz. Ozone
Output 50mg/h ( < 0.01 ppm)
Ionizer Output 8 million/cm
3
Recommended Room Size 50 ft
2
INSTALLATION & OPERATION
1. Unpack your PLH-E100 from its carton and remove protective material. Inspect the unit for any visible signs of damage.
If damage is evident, repack and contact your local Distributor.
2. Plug unit into any power outlet and move switch to the “ON” position.
3. An ionization odor should be present when the unit is powered on. This is normal and indicates the unit is working
properly.
4. Press the button once on the front of the unit to activate ozone, the indicator blue light will illuminate and it will
automatically turn off in 30 minutes, Press the button again on the front of the unit, the blue indicator light is flashing,
and it will automatically turn off in 4 hours.
5. To turn the unit off, move the switch to “OFF” position.
6. The use of this product and proper cleaning is effective against most odors and airborne particles, PLH-E100 will
cause dust and other particles to settle out of the air and onto surfaces where they can be taken away during normal
cleaning.
OZONIZER PLH-E100
CAUTION
Read this manual carefully for proper procedures and operation.
To prevent electric shock, do not plug or unplug unit with wet hands .
Do not disassemble or insert items into unit. Doing so, may cause damage or electric shock.
FEATURES
• Auto Mode.
• Compact size and portable.
• Chemical free operation.
• Low maintenance.
• Very quiet operation.
• Easy to use.