Renu Electronics GWY-500, Руководство пользователя

Страница: 11 / 98

Hardware
6
Doc No: UMAN\GWY-500-B\0106
REVISION 4
2.1 Dimensional details And Mounting Instructions
GWY-500 -B unit can be mounted on a back panel or on a DIN rail or can be left hanging. It comes with a separate DIN rail
plate when it is packed. User will have to attach the DIN rail plate to the unit if it has to be mounted on a panel or DIN rail. If
it has to be left hanging, make sure to screw the cables to the DB9 connectors on the Gateway unit. DIN rail plate also has
the provision to screw the unit to the back panel. Following drawing shows how to attach the DIN rail plate to the unit:
Follow instructions given below:
1. Attach the DIN rail plate to the unit using the clamps on the DIN rail plate.
2. Pull out the clip of the plate.
3. Put the unit on the DIN rail.
4. Push the clip in to secure the unit on the DIN rail.
GWY-500 unit is shipped with a separate DIN rail plate which has to be attached to the unit, if needed. User can use the
unit with or without the DIN rail plate. Following sketch shows mounting details of GWY-500 with the DIN rail plate.
DIN rail
clamp
DIN rail
clip
GWY-500
Slot for
clamp
40