FlexiPanels
®
Basic HMI
© Renu Electronics Pvt. Ltd.
Page
4
of
24
Introduction
FP2 series HMI with I/Os is suitable for simple applications. Available screen sizes are
4.3” WQVGA
and
7" WVGA Color TFT
. These HMIs are powered by FlexiSoft
®
programming software. These
products also support the IEC61131-3 logic programming environment which gives a unique edge
to these products.
All the products are compliant to EMC directive 2014/30/EU and LVD directive 2014/35/EU and
suitable for installation in hazardous locations because they are listed for UL Class I Div. 2.
This user manual gives detailed information regarding the hardware specifications, operating
conditions, installation, mounting, and wiring. All the information published in this manual is
produced and governed by RENU Electronics Pvt. Ltd. and is protected by Indian Copyright Act.
Before you start
FlexiPanels
®
FP2 series HMI with I/Os products are general-purpose human machine
interface devices, suitable for a variety of simple applications across various industries.
However, RENU Electronics is not responsible or liable for any indirect or consequential
damage resulting from the use of this product.
The user should check and confirm the suitability of the product before using it in any
specific application.
The diagrams and examples in this manual are included for illustration purposes only.
RENU Electronics assumes no responsibility or liability regarding actual use based on
these diagrams or examples.
Reproduction of the contents of this manual, in any form (in part or whole), is strictly
prohibited.
Following table shows various symbols that may be used in this manual to provide
information regarding safety, precautions, and usage of the product:
WARNING:
Indicates circumstances that may cause an explosion in a hazardous environment,
which may lead to injury or death, damage or economic loss
CAUTION:
Indicates specific precautions to be taken by the user during installation, operation
and maintenance of the product
ATTENTION
ATTENTION:
Indicates important information regarding the application and functions of the
product
