
28
7.2 Carburetor adjustment
The carburetor is a vital part of the engine. Adjusting should be left to our
company authorized dealer with the professional knowledge, specialized
date, and equipment to do so properly.
7.3 Engine oil replacement
WARNING
• Avoid draining the engine oil immediately after stopping the engine.
The oil is hot and should be handled with care to avoid burns.
1. Place the generator on a level surface and warm up the engine for
several minutes. The stop the engine and turn the 3 in 1 switch knob,
fuel tank cap air vent knob to “OFF”.
2. Remove the screws (1) and then remove the cover (2).
3. Remove the oil filler cap (3).
4. Place an oil pan under the engine. Tilt the generator to drain the oil
completely.
5. Replace the generator on a level surface.
NOTICE
• Do not tilt the generator when adding engine oil. This could result in
overfilling and damage to the engine.
maintenance
3
Содержание Patron GI-3000
Страница 1: ...operation manual INVERTER GI 3000 GENERATOR ...
Страница 35: ...35 11 wiring diagram wiring diagram ...
Страница 38: ...35 11 schéma de câblage schéma de câblage ...
Страница 72: ...guide de l utilisateur GI 3000 ...