12
If switches are working eff ectively the Status
LED will be
yellow
each time
the paddle is pressed.
Re-set trap within 1 minute
of doing the paddle test.
Service Process
1.
Assess Trap Status:
A:
CATCH:
Dispose of catch into black & yellow waste bag
B:
NO CATCH
Disarm the trap before continuing
2.
Clean & Re-Bait:
A
Note:
Ensure trap is in disarmed
state before handling and all actions
performed before re-arming
3.
Service the Module:
If necessary, remove & service the
module. Then replace.
See
Page 13
for more details on using
the interface.
4.
Note:
Be careful not trap your fi ngers.
Test Paddle:
Test the switch by pressing the paddle.
B
Clean trap in accordance with standard
cleaning procedure and refi ll the bait tray.
Reset the Trap:
When the trap is armed,
you will see the status
LED fl ash blue 10 times.
5.
10x