3
Press to switch on/off. When switched on, the unit will start in AUTO mode. As the
sensors determine the air quality, the fan speed will be set accordingly.
NOTE: The
UV-C lamp will be turned on by default.
Once the air quality is deemed
satisfactory, the unit will automatically switch to stand-by mode (under normal
conditions, the unit will run for approx. 30 minutes prior to switching to stand-by).
For further air purification, operate the unit manually.
Lock the control settings: In order to lock the keys of the panel, press the on/off
button and hold it down for 5 seconds. To unlock: Repeat. Once locked, the unit
can be operated with the remote control.
Press to set the fan speed: from 1 (quiet = 300m³/h) to 3 (max. intensity = 560m³/h).
Press the buttons to preset the operating time: + to increase, - to decrease (default
timer duration is 8 hours). The timer can be in- or decreased by 30 minutes intervals
for up to 24 hours of operation. The LCD screen displays the remaining time.
NOTE:
Should only be used when the unit is serviced.
Pressing the button and holding it
down for 5 seconds to resets the memory of the filter life indicator.
MODEL: Q01B
Hospital-Grade Air Purifier
Содержание Q01B
Страница 1: ...INSTRUCTION MANUAL MODEL Q01B Hospital Grade Air Purifier Rensair com...
Страница 2: ......
