Specifications:
•
Model:
REN08006-VP
•
Power:
1.5 hp
•
Deck Size:
20" (50.8 cm)
•
Voltage:
110 volt
•
Speed:
1500 rpm
•
Power Cable:
50 ft. (15.2 m) safety
yellow
•
Weight:
88 lbs (39.9 kg)
•
Amp Draw:
13.5 amps
•
Warranty:
5 years motor.
5 years metal components.
! WARNING !
IMPORTANT SAFETY
INSTRUCTIONS
Carefully read and understand this
manual before operating this
machine.
This machine must be grounded!
This floor/finishing machine shall be
grounded while in use to protect the
operator from electric shock.
Grounding provides a path of least
resistance for electric current. This
machine is equipped with a cord
having an equipment-grounding con-
ductor and grounding plug. The plug
must be plugged into an appropriate
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances. Do not remove
the ground pin under any circum-
stances.
This machine is for use on a nominal
120-volt circuit and has a grounding
plug that resembles the plug illustrated
in
Figure 1
. Make sure that the
machine is connected to an outlet
having the same configuration as the
plug. No adapter should be used with
this machine.
This machine is intended for commer-
cial use. It is constructed for use in an
indoor environment and is not intended
for any other use. Use only recom-
mended accessories.
1. Do not operate machine:
– Unless trained and authorized.
– Unless you have read and under-
stand the operators manual.
– In flammable or explosive areas.
– With a damaged cord or plug.
– If not in proper operating condition.
– In outdoor areas.
– In standing water.
– With the use of extension cords.
2. Before operating machine:
– Make sure all safety devices are in
place and operating properly.
3. When using machine:
– Do not run machine over cord.
– Do not pull machine by cord or
plug.
– Do not pull cord around sharp
edges or corners.
– Do not unplug by pulling on the
cord.
– Do not stretch cord.
– Do not handle plug with wet hands.
– Keep cord away from heated
surfaces.
– Report machine damage or faulty
operation immediately.
4. Before leaving or servicing
machine:
– Turn off machine.
– Unplug cord from outlet.
5. When servicing machine:
– Unplug cord from outlet.
– Use manufacturer supplied or
approved replacement parts.
To avoid electric shock,
please replace the power cord
immediately if any damage is detected.
Repairs must be performed only by
authorized and ualified persons.
1500 RPM BURNISHER
SAFETY PRECAUTIONS
Grounded
Outlet Box
Grounded
Outlet
Prong or
Grounding Pin
Figure 1
R
www.GoRenown.com
2
R
q