27
Application 1: Under cutting skirting board for new flooring
• Select high oscillation frequency.
• Distribute the use of the saw blade evenly to maximise the life of the
saw blades.
USING THE E-CUT SAW BLADES
1
2
3
4
Using the back side of the new
flooring as a guide, make a cut to
the appropriate length. (1)
Using one half of the blade edge to
start the cut beginning from the top of
the skirting. Try not to sink the whole
blade edge into the wood, leaving the
other half of the blade edge above the
surface will keep you in control. (1-3)
Remove the off-cut. (4-5)
Clear the space of any debris . (3)
Remove the offcuts. (2)
Slide the new flooring into place.
(4)
Application 2: Cutting a section of skirting
1
2
3
5
4
• Select high oscillation frequency.
• Setting the blade on a 45
o
angle
allow room for cutting the full height
of the skirting.
