Renova moviroll MRE 100 XS, Руководство по эксплуатации, Страница: 6 / 20

6
PACKAGING
Please do not throw away the wood packaging of your
moviroll as it might be useful for storage purposes, when
moving or, in case of damages, when the device must be sent back to Renova srl.
SERIAL NUMBER
Each
moviroll is provided with its serial number.
Please find the serial number of your
moviroll stamped on the moviroll
frame, above the rear wheel.
Example in the picture on the right.
Please find the serial number also on the warranty sheet provided with
the
moviroll .
IMPORTANT:
Always communicate the serial number when requiring assistance or spare parts for your moviroll .
instructions for use
▪
Unpack the appliance and store the packaging material
▪
After unpacking, make sure that the appliance is intact with no visible signs of damage caused by transport. If in
doubt, do not use the appliance and contact Renova srl
▪
Place the moviroll on a safe and flat surface that can support its weight
▪
Insert the battery into the special chassis. Previous recharge of the battery is not necessary
▪
Push the switch into the ON position
▪
‘ Ready to go ’ on the moviroll display indicates that the appliance is ready to be used
▪
Forward gear always engaged. Press and hold the button to select the reverse gear (emergency). Release the
button to return to forward gear.
▪
To start using the MRE XS / MRE XS LPT / MRE XS L moviroll to handle rolls just spin the accelerator handle.
▪
Push the switch into OFF position when the moviroll is not running to preserve the battery charge
PLEASE NOTE:
The moviroll battery roll pusher is equipped with reverse gear. Please use the reverse gear to release the moviroll
from the roll, when the moviroll remains locked beneath the roll weight because of an obstacle or a wrong
maneuver.