Renogy RCC20RVRE-G1, Руководство пользователя

Страница: 18 / 28

17
NOTE
1. Clear overall power generation to 0 KWh
2. Selecting Battery Type
Press the UP / DOWN ARROW to the appropriate interface in order to change
the specific parameter.
NOTE
Incorrect battery type setting may damage your battery. Please check your
battery manufacturer’s specifications to when selecting battery type.
If selecting Lithium and wanting to set Battery Voltage or Charge Parameters,
go to “3. Select lithium Battery Voltage and Charge Voltage,” later in this table.
The user can switch to the KWh screen by pressing the up/down button. In order to reset
the current power value to 0 KWh, the user needs to long press the right arrow for three
seconds, and then short press the "Up" arrow to clear the value when the power value
flashes.
In the screen showing the battery voltage, hold down RIGHT ARROW for approximately
3-5 seconds before the screen flashes the current battery type.
Once flashing, use the UP or DOWN ARROW to select the proper battery type and then
hold down RIGHT ARROW again to lock in the selected battery type.
WARNING
SLD is referring to AGM battery
12V 12V