i
Point Source Array Modules
10
Rear Panel Connections & Controls
Optional Array Module High Frequency Control
Not all setups are identical and neither are all rooms. That is why the VAX101i series
modules can include an optional rear mounted high frequency level control.
The high frequency level control allows you to adjust the high frequency output of each
array module to compensate for:
1. the increased loss of high frequency
energy from air loss over distance
2. the increased coupling between array
modules at low frequencies
3. different room sizes and acoustics
They allow you to maintain the proper High/Mid/Low frequency balance throughout the
listening area. As a general rule use “Flat” when working with a single cabinet, plus 6
when using 2 cabinets in a small array and plus 9 in arrays having 3 or more cabinets.
Optional High Frequency Level Control
VAX101i Connections
Screw Terminal Strip
Inputs
Looping In & Out
Neutrik 4-Pin Speakon Connectors
VAX101i modules require bi-amplification. An optional passive crossover network is available
