If your computer has no USB 3.0 port (i.e. on the mainboard or a USB 3.0 card), you can also
connect the product to a USB 2.0/1.1 port. Devices connected to the USB hub (both USB 2.0
and USB 1.1) will work at normal USB 2.0/1.1 speeds.
The USB hub works in the so-called “bus powered mode”. This means that the power via the
computer to the USB hub is supplied to all four ports (according to the USB 3.0 standard 900
mA, according to the USB 2.0 standard 500 mA).
This is sufficient for most mice or keyboards; however, many other devices may no longer
function correctly (for example, external 6.35 cm / 2.5” hard drives, USB cameras, etc.).
Once the LED on top of the product lights up, the product is ready for use.
3. Windows will recognize the new hardware and install the drivers automatically.
4. Connect your USB devices to the USB hub.
Tips & notes
• The USB 3.0 hub is USB 2.0/1.1 compatible. This means that common USB 2.0/1.1 devices can be
operated via the USB 3.0 hub without any problems. However, the USB 2.0/1.1 devices will not work any
faster!
• To use the USB 3.0 hub at its full speed, all devices used must support USB 3.0: The USB device itself (i.e.
external hard drive), the USB hub and your computer’s USB controller.
• In practice, the theoretical maximum speed of USB 3.0 (or USB 2.0/1.1) is not reached. The reason for this
may include protocol information, simultaneous use of several USB devices or speed restrictions imposed
by the connected USB device or your USB controller/mainboard.
• In DOS or in Windows Safe Mode, USB operation is not possible. Depending on your computer or BIOS
and setup settings, you may nevertheless be able to use a USB keyboard or USB mouse. It may be
necessary to connect these devices directly to your computer’s USB ports and not to a USB hub.
• USB devices can be connected and disconnected during use. Your computer need not be turned off to
connect or disconnect devices.
• If data transfer is taking place via the USB port – i.e. if an external hard drive is transferring data to your
computer – and you disconnect the USB plug, your operating system may crash. This may also result in
data lost or damage to the file system of your external hard drive.
• In Windows
®
XP, Vista™, 7, 8 an arrow may appear in the menu bar when some devices are connected
(i.e. a USB hard drive). This function allows you to “disconnect” the USB device from your computer. After
that, you can unplug the USB device without any danger.
• Always use appropriate USB 3.0 cables to connect USB 3.0 devices. Please note that the longer the
USB 3.0 cable, the slower the data transfer rate may be.
Care and cleaning
• Disconnect the product from the power supply before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
•
Clean the product with a dry, fiber-free cloth.
• Do not immerse the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
a) Hub
Input voltage/current ............................. 5 V/DC, max. 900 mA (via USB)
USB standard ....................................... USB 3.0 (downward compatible with USB 2.0/1.1)
System requirements ............................ Windows
®
2000 (with SP4)
XP (Home, Pro, with SP2, SP3, only 32 bits)
Vista™ (32 bits and 64 bits), 7 (32 bits and 64 bits), 8, 8 Pro
Mac OS X 10.5 and higher, Linux Kernel 2.4
Operating temperature/humidity ........... 0 to +60 ºC, 20 – 80 % RH
Storage temperature/humidity .............. -20 to +60 ºC, 10 – 95 % RH
Cable length ......................................... 90 cm
Dimensions (W x H x D) ....................... 88 x 16 x 56 mm
Weight .................................................. 100 g
b) Optional power adaptor
Output voltage/current .......................... 5 V/DC, 3 A
Polarity ..................................................
Plug Ø (outer/inner) .............................. 3.5/1.3 mm
Operating instructions
4-port USB 3.0 hub, black
Item no. 1614145
Intended use
This product is intended to connect to a computer with a USB port and provide four additional USB ports.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• 4-port USB 3.0 hub
• 4 x rubber feet
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of personal injury,
such as electric shock
.
An exclamation mark in a triangle indicates important instructions in this operating manual that
absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. There is a risk of fatal injury due
to electric shock! Allow the product to reach room temperature before connecting and using
it. This may take several hours.
• When setting up the product, make sure that the cable is neither kinked nor pinched.
• Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operation
Make sure the total power input of all connected USB devices does not exceed
900 mA (when connected to a USB 3.0 port of a computer) or 500 mA (when connected to a USB
2.0 port of a computer) respectively.
If necessary, connect an optionally available power adaptor (see “Technical data”) to the DC
socket next to the USB cable to supply higher output current per USB port.
1. If needed, attach the included rubber feet to the bottom of the USB hub. This ensures that the product
is stable and also serves to prevent damage to surfaces.
2. Connect the USB hub via its USB cable to a free USB 3.0 port on your computer. The computer does
not need to be turned off.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in
part, is prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1614145_V1_0218_02_mxs_m_en
