a) Power Usage
•
Without an additional power adaptor (sold separately), the hub functions in ”Bus-Powered-
Mode”. This means that the current supplied by the computer will be divided by the number
of ports being used.
•
Make sure that the combined current of all connected devices does not exceed 900 mA.
•
Devices with high startup currents (e.g. external hard disks) may cause the combined current
to exceed 900 mA during startup. Use a power adapter in such cases.
•
This hub is not meant to serve as a stand-alone charger. It is not compatible with iPads or any
other devices with irregular charging requirements.
b)
Power Adaptor (Not Included)
•
If a power adaptor is used (5 V/DC, max. 4000 mA), all USB 3.1 (Gen 1) ports can supply a current of
900 mA, Type C 1500 mA.
•
Connect the adaptor to the 5V/DC power input
(2)
.
Make sure that all connected devices do not exceed the max. possible supplied current of the
power source.
Care and Cleaning
•
Disconnect the product from your computer and power supply and remove all peripherals before each
cleaning.
•
If it is hot, wait for it to cool down.
•
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage ................................. 5 V/DC (via USB-C™), max. 900 mA
Transfer rates ....................................... Max 5 Gbps
Downstream ports ................................ 3 x USB 3.1 (Gen1) Type A
Compatibility ......................................... USB 2.0 / USB 1.1
Card support ......................................... TF / SD / microSD / microSDHC / microSDXC
Operating conditions ............................. 0 to 40 °C, 10 – 90 % relative humidity
Storage conditions ................................ -10 to 70 °C, 10 – 90 % relative humidity
Dimensions (L x W x H) ........................ 143 x 36.5 x 17.7 mm
Cable length ......................................... 50 cm (w/o plug)
Weight
.................................................. 90 g
System Requirements
Windows
®
, Mac, Linux
Power Adaptor (Not Included)
Output voltage/current .......................... max. 4000 mA
Plug diameter ....................................... 1.35 mm (inner) / 3.5 mm (outer), length: 9 mm,
Operating Instructions
3+2 Port USB 3.1 (Gen 1) Type-C
TM
Hub with SD Card Reader
Item No. 1687474
Intended Use
This device expands the USB-C
TM
port on your computer into additional USB-A ports that support USB3.1
(Gen1) super speeds of up to 5 Gbps. A built-in card reader for SD/TF and Micro SD is also featured.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in short circuits, fires, or other hazards. Read the instructions carefully and store them in a safe place.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
•
USB hub
•
Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
•
Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, steam and solvents.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
•
Also observe the safety and operating instructions of any other devices which are connected
to the product.
•
Consult an expert when in doubt about the operation, safety or connection of the appliance.
•
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
•
If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating Elements
1
2
3
4
5
6
1 USB-C™ plug
2 5V/DC power input
3 LED power indicator
4 USB type A ports
5 SD/TF card reader
6 Micro SD card reader
Operation
This hub is suitable for charging and synchronizing mobile devices. Devices with high current
demands (e.g. tablets) might not charge.
•
Connect the USB-C™ plug
(1)
to an available USB-C™ port on your computer.
•
Connect a device to an available USB type A port
(4)
or insert an SD card into a reader
(5)
(6)
.
•
A LED power indicator
(3)
will indicate when the hub is connected.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1687474_v1_0618_fl01_02_m_4L(1)
