Driver Installation
Windows detects the plug-in card automatically. Cancel the automatic search for dri- vers or
the hardware recognition.
Insert the supplied data carrier into the respective drive of your computer.
The required drivers are in the directory “Realtek \ RTL8111_8125”, in the subdirectory of the
corresponding operating system.
Start the “Setup.exe” program and follow all instructions from the software or from Windows.
After the driver has been installed, it is necessary to restart before the plug-in card can work
correctly.
With newer versions of the driver software, this procedure might be dif- ferent. In that
case, observe the information in the manufacturer’s English operating instructions.
Tips and Notes
•
Gigabit LAN requires at least fully wired CAT5e network cables (all 8 wires are ne- cessary
for a connection).
•
The “LINK/ACT” LED on the plug-in card indicates data transmission (LED flashes) and an
available connection to the network (LED on).
•
The LED for “1000M” is lit when there is an active gigabit network connection.
•
If you have a network or system administrator for your network (in a large company, for
example), please allow this person to take responsibility for installation and con- figuration.
Do not install the plug-in card in the computer yourself.
•
The specified maximum data transfer rate of 1000Mbps, or about 125MB/s is never reached
in practical operations. This is due to the communication method used, transmission errors,
other devices on the network etc.
However, much higher data rates than on 100Mbps networks are possible depen- ding on
the computer & network in use.
•
With Windows, it might take some time until the PCs appear on the network.
When you turn on the computer and if Windows is loaded on all computers you will be able
to access the other PC’s immediately.
If, after a few minutes, it is still not possible to access other PCs, check any firewall and/or
virus scanner settings that may be used.
Naturally, the access permissions also have to be set accordingly, if you are using an oper-
ating system that offers such features.
Consult the applicable operating instructions, when using a network printer or other devices
in the network.
There are numerous causes explaining why a network connection is not successful. Please
refer to the appropriate specialist literature or to a specialist technician.
•
If you are not using a DHCP Server (e.g. integrated in all DSL-routers), you should assign
a static IP address to each device within the network.
For example, set the router to 192.168.1.1, set the first computer to 192.168.1.2, the second
computer to 192.168.1.3, and so on.
The first three digits must be the same on all computers; the last digit can range from 1 to
254.
The additionally required “subnet mask” has to be set to 255.255.255.0 for all the computers
in the network.
Please keep in mind that an IP address (such as 192.168.1.1) can only be used
once in the network. When you set your router to the IP address 192.168.1.1, no
other device in the network can use this IP address!
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines. You thus fulfill your statutory obligations and con
-
tribute to the protection of the environment.
Operating Instructions
Gigabit PCI Express Card 1 Port
Item No. 645810
Intended use
This product is intended for installation on a suitably equipped computer in order to provide
one gigabit network port.
The safety instructions must be observed at all times!
Any use other than that described above could lead to damage to this product and involves
the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or
converted!
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Delivery content
• Network interface card
• Data carrier with driver software
•
Low-profile slot bracket
•
Manufacturer’s operating instructions in English (available either in printed form or as a PDF
file on the enclosed CD)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads
or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
The warranty will be void in the event of damage caused by failure to ob- serve
these safety instructions! We do not assume any liability for any re- sulting
damage!
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instruc- tions! The
warranty will be void in such cases!
•
Unauthorised conversion and/or modification of the product is not allo- wed for
safety and approval reasons.
• The product is not a toy and should be kept out of the reach of children!
• Do not leave packaging material carelessly lying around, since it could become a
dangerous plaything for children.
• If you have any questions that are not answered in this manual, please contact
our technical service or another specialist.
Installation
If you do not have the expertise to install the device correctly, please contact
an expert or a specialist workshop and let them carry out the installation!
Improper installation damages the plug-in card as well as your computer and
all connected devices.
Switch off the computer in which the plug-in card is to be installed and all con-
nected devices and disconnect all devices from the mains voltage; re- move
the plugs from the mains supply! Just turning off at the on/off switch is not
enough!
• Open your computer’s housing and carefully remove the cover.
•
Locate a free PCI-E slot; remove the corresponding slot bracket and insert the card into the
PCI-E slot. Screw the plug-in card firmly in place.
If you need to install the plug-in card in a flat computer housing, a low-profile slot
bracket is enclosed. Remove the long slot bracket from the plug-in card and then
mount the low-profile slot plate.
• Close the computer housing.
• Connect the computer and monitor to the mains voltage again and switch on all devices.
• If your computer does not start correctly, switch it off immediately and check all the settings
and cable connections.
Before opening the PC again, disconnect the PC from the mains voltage, see above!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in
-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*645810_v3_0320_02_dh_m_en
