Renkforce PL500D WiFi, Руководство пользователя

Страница: 30 / 36

30 Network configuration
Renkforce PL500D WiFi
WPS via PIN:
햲 To interconnect WLAN clients securely in your wireless network via PIN
variants, enter an individualised key in the configuration interface under
WLAN configuratio n -> Wi-Fi Protected Setup (WPS ) -> PIN and start
the encryption process by pressing the Start setup button.
햳 Open the configuration interface of the WLAN client to be added and
transmit the PIN selected on the PL500D WiFi. Confirm the encryption
process as described there. Now the devices exchange their encryption
keys and establish a secure WLAN connection. The WLAN LED on the
front panel indicates the synchronisation process by flashing.
The client can also create the PIN; this must then be entered onto
the configuration interface of the PL500D WiFi.
Use of the WPS process implies either WPA or WPA2. For that reason, keep
in mind the following automatic settings depending on the encryption stand-
ard (also refer to Chapter 'Access point'), i.e.
쑗
if under WLAN configuration -> Access Point No encryption or
WEP is selected in advance, WPA2 is set automatically . The newly
generated password is displayed under WLAN configuration ->
Access Point in the Key field.
쑗
if under WLAN configuration -> Access Point WEP is selected in
advance, WPA2 is set automatically . The newly generated pass-
word is displayed under WLAN configuration -> Access Point in
the Key field.
쑗
if under WLAN configuration -> Access Point WPA is selected in
advance, this setting remains with the previously assigned pass-
word.
쑗
if under WLAN configuration -> Access Point WPA2 is selected in
advance, this setting remains with the previously assigned pass-
word.
4.5.7 WiFi Move
Wi-Fi Move Technology is a function for synchronising the Wi-Fi settings of
all PL500D WiFi adapters connected to your home network.