Operating elements
OUT
IN
1
2
3
1 RCA audio OUT ports
2 Slot (both sides)
3 RCA audio IN ports
Operation
•
If needed, the product can be mounted to a suitable, even surface. There is a slot (2) located
on each side for this purpose. Make sure to protect the product from moisture.
•
Switch off all devices to be connected before the cables are connected.
• The RCA audio ports of the noise filter are marked red and black. Make sure not to
interchange the red and black RCA audio ports of the noise filter during connection. Always
connect red to red and black to black.
• Connect the outputs of your playback device (e.g. CD player, car radio) to the RCA audio
IN
ports (3) of the noise filter using an audio cable.
•
Connect an audio cable to the RCA audio OUT
ports (1) of the noise filter and to the inputs
of your output device (e.g. amplifier).
• After having connected all cables, turn on your devices.
Cleaning and care
•
Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
•
Never submerge the product in water or other liquids.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Input/output...................................
2 x RCA audio ports each, gold-plated
Input/output impedance ................
12 kΩ
Distortion factor
............................ < 0.001 %
Frequency response
..................... 20 Hz – 30,000 Hz
Transmission ratio ........................ 1:1
Operating conditions ..................... 0 to +40 ºC, 10 % – 85 % RH (non condensing)
Storage conditions ........................
-10 to +70 ºC, 5 % – 90 % RH (non condensing)
Dimensions (W x H x D)
...............
90 x 30 x 86 mm
Weight
..........................................
136 g
Operating instructions
CV042 Isolator/noise filter
Item no. 1429552
Intended use
The product is intended for reducing noise when using high-end music equipment. The RCA
audio ports of the noise filter are gold-plated. When having installed music equipment, guided
cables can cause undesired background noise (hissing and humming noise) during music
playback. The product eliminates such background noise. Hissing noise is usually caused for
music equipment in vehicles, which is why noise filters are often used in such environments.
It is intended for indoor use only. Do not use it outdoors.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may be
damaged. In addition, improper use can cause hazards such as short-circuiting, fire etc. Read
the instructions carefully and keep them for future reference. Make this product available to
third parties only together with its operating instructions.
The product corresponds to the legal, national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Isolator/noise filter
•
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website
www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in these operating instructions, we assume no liability for any
resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapors and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1429552_v1_0416_02_hk_m_EN
