• Only connect the power adaptor to a nor-
mal mains socket connected to the public
supply. Before plugging in the power adap-
tor, check whether the voltage stated on the
power adaptor complies with the voltage of
your electricity supplier.
• Never connect or disconnect power adap-
tors if your hands are wet.
• Never unplug the power adaptor from the
mains socket by pulling on the cable; al-
ways use the grips on the plug.
• When setting up the product, make sure
that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can
trip over or become entangled in them. This
poses a risk of injury.
• For safety reasons, disconnect the power
adaptor from the mains socket during
storms.
d) USB power source
• Before connecting, make sure that the USB
power source can deliver sufficient current,
otherwise you may damage the source.
Do not use a USB port of a computer, key-
board or USB hub without a power adapter
as the current supplied by these ports is
insufficient.
e) Data Loss
• Inserting or removing a card during data
transmission can damage the drive and/or
result in loss of data.
Care and cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the envi
-
ronment.
Technical data
a) Unit
Input voltage / current ................... 5 V/DC, 3A
Transfer speed ............................. max. 2.0 GB/min.
Card size ...................................... max. 2 TB
Display .......................................... Monochrome, backlight, LCD
Supported card formats ................ FAT16/32/64, Windows
®
NTFS, Linux Ext2/Ext3/Ext4
USB charger cable ....................... 12 cm
Operating conditions ..................... 5 to +45 ºC, 5 – 95 % RH (non-condensing)
Storage conditions ........................ -20 to +85 ºC, 5 – 95 % RH (non-condensing)
Dimensions (W x H x D) ............... 135 x 80 x 25 mm
Weight .......................................... 160 g
b) Power adapter
Input.............................................. 100 - 240 V
Input AC frequency ....................... 50 - 60 Hz
Output voltage .............................. 5.0 V/DC ±6 %
Output current ............................... 3.0 A max.
Output power ................................ 15.0 W max.
Average active efficiency
.............. 81.4 %
Efficiency at low load (10%)
......... 78.7 %
No load power consumption ......... 0.10 W
Model identifier:
ATS018T-W050V
Commercial registration number:
HRB 3896
Manufacturer:
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau
Important Information
Portable 1 to 2 SD/MicroSD Flash Duplicator
Item No. 2245864
Intended use
The product is a portable 1 to 2 SD/MicroSD flash card duplicator and does not require a com
-
puter for use. It can be powered via mains power supply using the included adapter, or through
a USB power source such as a portable power bank using the included cable.
Read the operating instructions before using the product.
Contact with moisture must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in or other hazards. Read the instructions carefully and store
them in a safe place. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Duplicator
• Power adapter
• USB charging cable
• Important information
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do
not follow the safety instructions
and information on proper han-
dling in this manual, we assume
no liability for any resulting per-
sonal injury or damage to prop-
erty. Such cases will invalidate
the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the
reach of children and pets.
• Do not leave packaging material lying
around carelessly. This may become dan-
gerous playing material for children.
• Protect the appliance from extreme tem-
peratures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases,
steam and solvents.
• Do not place the product under any me-
chanical stress.
• If it is no longer possible to operate the
product safely, take it out of operation and
protect it from any accidental use. Safe
operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in
poor ambient conditions or
- has been subjected to any serious trans-
port-related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the ap-
pliance.
•
Maintenance, modifications and repairs
must only be completed by a technician or
an authorised repair centre.
• If you have questions which remain un-
answered by these operating instructions,
contact our technical support service or
other technical personnel.
• Never use the product immediately after
it has been brought from a cold room into
a warm one. The condensation gener-
ated could destroy the product. The plug-in
power supply unit also involves danger to
life by electric shock! Allow the product to
reach room temperature before connecting
it to the power supply and putting it to use.
This may take several hours.
b) Connected devices
• Also observe the safety and operating in-
structions of any other devices which are
connected to the product.
c) Power adapter
• Connect the appliance to a wall socket that
can be accessed easily.
• As power supply, only use the supplied
mains adaptor.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2245864_v2_0920_02_dh_ss_en
