Renkforce 81 83 59 Скачать руководство пользователя страница 3

 

  Safe operation can no longer be assumed if:

 

  -  the product shows visible signs of damage

 

  -  the product ceases to function 

 

  -   the product was stored for a longer period of time in unfavourable condi-

tions

 

  -  it was exposed to heavy loads during transport

 

•  When the product is brought from a cold into a warm room (e.g. during 

transport), condensation may form. 

 

  Allow the product to reach room temperature before you connect it to the 

mains voltage. This may take several hours. 

 

  With moisture on the AC adapter there is also the danger to life from elec-

tric shock!

 

•  Do not carelessly leave the packaging material lying around, since it could 

become a dangerous plaything for children.

 

•  In  business  institutions,  the  accident  prevention  regulations  of  the  Em-

ployer’s Liability Insurance Association for Electrical Systems and Operat-

ing Facilities must be observed.

 

b) AC adapter

 

•  The design of the AC adapter complies with IEC Protection Class II (double 

insulated electrical appliances). 

 

•  Connect the AC adapter only to a proper outlet of the public supply net-

work.

 

•  The socket for the AC adapter must be located in direct proximity to the 

device and easily accessible.

 

•  The AC adapter is only intended for use in dry, enclosed interiors; it must 

not get damp or wet. There is a life-threatening hazard through an electric 

shock!

 

•  Do not pull the AC adapter from the power outlet by pulling on the cable. 

 

•  Protect the cable of the AC adapter from sharp edges and do not step on 

it.

 

•  If the AC adapter is damaged, do not touch it; there is a danger to life from 

electric shock!

 

  Switch off the power supply to the outlet to which the AC adapter is con-

nected (e.g. switch off at the corresponding circuit breaker or remove the 

safety fuse and then switch off the corresponding RCD). 

 

  Now disconnect the AC adapter from the outlet and take the product to a 

specialized workshop.

 

•  Only use the AC adapter provided to operate the camera. If the AC adapter 

is faulty, it must be replaced by an identical, stabilised AC adapter with the 

same technical specifications (voltage/current).

 

c) Wireless camera

 

•  The camera is suitable for use in indoor and outdoor areas (IP65). How-

ever, it must never be used in or under water, as this will destroy it.

 

•  The plug on the camera’s power cable is not waterproof or water resistant 

and must therefore be placed in a dry indoor area (for example, in a suit-

able connection box).

 

•  The camera must not be exposed to extreme temperatures, direct sun-

light, strong vibrations or heavy mechanical stress. 

 

•  Make sure that the connection cable is not pinched or damaged by sharp 

edges.

 

•  The use of the wireless camera does not replace the personal supervision 

of children or people who require special assistance, but serves only as 

support to this supervision.

 

•  Mount  the  camera  in  such  a  way  that  it  does  not  point  towards  bright 

sources of light (e.g. sunlight or flood lights). Not only does this lead to an 

overexposed and unusable image, but it may also damage the image sen-

sor if exposure is of a long duration.

G

  Operating instructions

  2.4 GHz Gigital Wireless Camera

 

Item no. 81 83 59

Intended use

This camera is intended for monitoring and protecting of secluded or critical areas 

(e.g. entrance areas, driveways, underground car parks). 
The  product  can  also  be  used  to  extend  or  as  accessory  for  e.g.  a  suitable/corre-

sponding monitor/DVR set.
The video and audio signal of the camera is transmitted wirelessly. The wireless cam-

era’s power is supplied by the AC adapter included in the delivery. 
Please bear in mind that it is prohibited by law to observe strangers with a camera 

without their knowledge and consent. Observe the rules and regulations of the country 

where you are using the camera.
The safety instructions must be observed at all times!
Any use other than that described above could lead to damage to this product and 

involves the risk of short circuits, fire, electrical shock, etc. No part of the product may 

be modified or converted!
This product complies with the applicable national and European requirements. All 

names of companies and products are the trademarks of the respective owners. All 

rights reserved.

Contents

•  Wireless camera with sunscreen
•  Mounting bracket for wireless camera with mounting materials (screws/wall plugs)
•  Antenna for the wireless camera
•  AC adapter
•  Operating instruction

Explanation of the symbols

  The lightning symbol inside a triangle is a warning to inform you of potential 

risks of personal injury, such as electrical shock.

  This symbol indicates specific risks associated with handling, function and 

use. 

  The “arrow” symbol indicates special tips and operating information.

Safety Instructions

 

The  warranty  will  be  void  in  the  event  of  damage  caused  by  failure  to  
observe these safety instructions! We do not assume any liability for any 
resulting damage!

 

We  shall  not  accept  liability  for  damage  to  property  or  personal  injury 
caused by incorrect handling or non-compliance with the safety instruc-
tions. In such cases, the warranty will be null and void.

 

a) General

 

•  The  unauthorized  conversion  and/or  modification  of  the  product  is  in-

admissible for reasons of safety and approval (CE). Never dismantle the 

product.

 

•  The product is not a toy and should be kept out of the reach of children. 

Install and use the product where it is out of the reach of children.

 

•  Do  not  use  this  product  in  hospitals  or  medical  institutions.  The  trans-

mitted signals might cause interference with the function of life-support 

equipment. The same may also apply to other areas.

 

•  Handle the product with care; it can be damaged by impacts, blows or 

falls even from a low height.

 

•  If you notice any damage, don’t use the product any more. Take it to a 

specialist workshop.

Содержание 81 83 59









Отзывы: