5. Install the shock mount and adjust it to a suitable position according to the size of the
microphone. Microphones with a diameter up to 2.05″ can be used.
6. Install the microphone clip.
Care and cleaning
• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
•
Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Load capacity .......................................2 kg
Mobile holder range ..............................120 - 170 mm
Operating/storage conditions ................ -20 to + 50 °C
20 - 80 % RH (non-condensing)
Dimensions (W x H x D) .......................170 x 420 x 70 mm (folded)
Weight ..................................................550 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE. *2369289_v2_1121_02_DS_m_4L_(1)