•
Insert the connection plug of the supplied power cable into the connection socket of the
power adapter. Insert the round plug of the power adapter into the
53.5V DC
connection
socket
(7)
of the network switch. Connect the safety plug of the power cable to a suitable
mains socket.
•
The
PWR
LED indicator light
(1)
lights up, indicating that the product is connected to the
mains.
•
As soon as the network connection is active and a PoE connection is established, the
corresponding 2 - 5 LED indicator light goes on, indicating that an electrically operated device
has been detected.
•
If you want to connect a network cable (CAT 5e) of more than 100 m long, you can use the
Default
/
Extend
switch
(4)
to switch to
Extend
. In this case, however, the transmission speed
is reduced to 10 Mbps. For this function, the maximum length of the network cable can be
250 m.
•
Disconnect all connected devices from the product after use. Disconnect the power adapter
from the mains socket after use. The LED indicator light goes out after a few seconds.
Brief description of the controls
Control
Function
PWR
LED
A steadily lit
LED (green) indicates that the product is supplied
with power.
PoE 2 - 5
LED indicator
lights
A steadily lit LED (orange) indicates that the device is powered
by the product via one or more LAN ports. The LED flashes
when the power supply is overloaded.
Link/Act
LED
A steadily lit green LED indicates that the product is connected
to a device via one or more LAN ports. No data are transferred.
As soon as data are transferred, the LED flashes.
Default/Extend
switch
Switch to
Default
or
Extend
depending on the transmission
distance.
2 - 5
LAN ports
Connect Ethernet devices, such as router, camera or computer.
1-Uplink
LAN port
Connection for incoming network cable.
Power 53.5V DC
power
adapter port
Connection for the power adapter.
Earth connection
The earth connection
(8)
is available for connection to the
electrical earthing. It can serve as overvoltage protection.
Care and cleaning
•
Disconnect the product from the mains socket and connected devices before cleaning.
•
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
•
Do not immerse the product in water or other liquids.
•
Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to environmental protection.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
*2144953_v1_1019_02_hk_m_en
Technical data
a) Network switch
Input voltage/current ................53.5 V/DC, 1.2 A
Power consumption .................max. 66.5 W (PoE active)
PoE output power ....................max. 60 W for all ports, max. 30 W per port
IEEE standard .........................802.3, 802.3i, 802.3u, 802.3x , 802.3az, 802.3af, 802.3at
Supports....................................... full duplex operation with flow control according to IEEE 802.3x,
half duplex operation with flow control via back pressure
Max. transmission rate ............1 Gbps
Ports (RJ45) ............................ 5 ports x 10/100 Mbps auto negotiation, of which 4 ports have
PoE function (2 - 5), compatible with 802.3at/af
Number of MAC addresses .....1 K
Network media .........................10Base-T: UTP CAT 5e cable and higher (max. 250 m)
100Base-Tx: UTP CAT 5, 5e cable (max. 100 m)
System requirements ............... Windows
®
XP (Home, Pro, with SP1, SP2, SP3, 32-bit only),
Vista™ (32/64-bit), 7 (32/64-bit), 8 & 8.1 (32/64-bit),
10 (32/64-bit), 10S, RT,
Mac OS 10.5 to 10.14, Linux Ubuntu 10.04 to 19.04
Operating conditions ................0 to +45 ºC, 10 – 90 % RH (non-condensing)
Storage conditions ...................-40 to +70 ºC, 5 – 90 % RH (non-condensing)
Dimensions (W x H x D) ..........90 x 21 x 80 mm
Weight
.....................................approx. 176 g
b) Power adapter
Input voltage/current ................100 - 240 V/AC, 50/60 Hz, 1.5 A
Output voltage/current .............53.5 V/DC, 1.2 A
Power cable length ..................approx. 1.4 m
Connecting cable length ..........approx. 1.2 m
