7 0
0
0
#
Enter the memory code "70" and the keypad lock disable code ("00").
Press the # key to confirm your entry.
The keypad will be locked when an incorrect code is entered.
*
Press the * key to exit programming mode. The yellow LED will start to
flash again. The notification tones are now disabled. This setting is useful
in quiet office environments.
70 + 1 + # = Lock the keypad for 30 seconds
3 2 8 9
*
Enter the master code (in this example, the master code is "3289")
to enable programming mode, and then press the * key. The code lock
will beep twice and the yellow LED will stay constant to indicate that
programming mode is enabled.
7 0
1
#
Enter the memory code "70", and then press "1" to enable the keypad lock.
Press the # key to confirm your entry.
The keypad will be locked for 30 seconds after 10 incorrect entries.
*
Press the * key to exit programming mode. The yellow LED will start to
flash again. The notification tones are now disabled. This setting is useful
in quiet office environments.
70 + 5 to 10 + # = Lock the keypad for 15 minutes
3 2 8 9
*
Enter the master code (in this example, the master code is "3289")
to enable programming mode, and then press the * key. The code lock
will beep twice and the yellow LED will stay constant to indicate that
programming mode is enabled.
7 0
5
,
6
,
7
,
8
,
9
1 0
#
Enter the memory code "70", and then enter the number of incorrect entries
that triggers the keypad to lock (5 to 10).
Press the # key to confirm your entry.
The keypad will be locked for 15 minutes when the preset number of
incorrect entries is reached.
*
Press the * key to exit programming mode. The yellow LED will start to
flash again. The notification tones are now disabled. This setting is useful
in quiet office environments.
66