• Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the appliance ceases to function
- the device was stored for a longer period of time in unfavourable conditions
- it was exposed to heavy loads during transport
• When the product is brought from a cold into a warm room (e.g., during transport),
condensation water may form.
Allow the product to reach room temperature before you connect it to the power
supply. In some cases, this may take several hours.
There is the deadly peril of an electric shock, if the power adapter gets wet!
• Do not leave the packaging material carelessly unattended; it could become a
dangerous plaything for children.
• In business institutions, the accident prevention regulations of the Employer’s Li-
ability Insurance Association for Electrical Systems and Operating Facilities must
be observed.
• In schools, educational centres, hobby and self-help workshops, the operation of
the product must be supervised by trained employees.
• If you have any questions that are not answered in these operating instructions,
please contact our technical support centre or consult a professional.
b) AC adapter
• The design of the plug-in power adapter complies with IEC protection class II
(double insulated electrical appliances).
• Connect the power adapter only to a proper outlet of the public supply network.
• The power socket where the power adapter is plugged in must be easily acces-
sible.
• The AC adapter is only suitable for indoor use in dry interiors; it must never get
damp or wet. There is a risk of a life-threatening electric shock!
• Do not pull the power adapter from the mains socket by pulling on the cable.
• Protect the cable of the AC adapter from sharp edges and do not step on it.
• Never touch a power adapter that shows signs of damage, as this could cause a
fatal electric shock!
Switch off the mains voltage to the mains socket to which the power adapter is
connected (e.g., switch off at the corresponding circuit breaker or remove the
safety fuse and then switch off the corresponding RCD).
You can then unplug the power adapter from the mains socket. Afterwards, do no
use the product anymore, it must be disposed of in an environmentally friendly
way.
• Only use the power adapter provided to operate the wireless camera. If the power
adapter is faulty, it must be replaced by an identical, stabilised power adapter with
the same technical specifications (voltage/current).
c) Radio camera
• The wireless camera is suitable for use in indoor and outdoor areas (IP65). How-
ever, it must never be used in or under water, as this will destroy it.
• The wireless camera must not be exposed to extreme temperatures, direct sun-
light, strong vibrations or heavy mechanical stress.
• The connecting plug used for the power connection is protected against moisture.
However, do not place it in or under water. We recommend a place where it is
protected from direct rainfall.
• The AC adapter is only suitable for indoor use in dry interiors; it must never get
damp or wet. There is a risk of a life-threatening electric shock!
• Make sure that the connection cable does not get pinched, kinked or damaged
by sharp edges.
• The use of the wireless camera does not replace the personal supervision of chil-
dren or people who require special assistance, but serves only as a support to
this supervision.
• Mount the camera in such a way that it does not point towards bright sources
of light (e.g., sunlight or flood lights). Not only does this lead to an overexposed
and unusable image, but it may also damage the image sensor if exposure is of
a long duration.
Operating Instructions
2.4GHz Digital Wireless Camera
Item no. 1518460
Intended Use
The wireless camera is used as an additional camera for a surveillance system suitable for
this purpose (for example, Conrad item no. 1505092). If the wireless camera supplied here is
not explicitly offered as an accessory for the respective monitoring system, then operation is
not possible.
The video signal of the camera is transmitted wirelessly to the surveillance system. The wire-
less camera‘s power is supplied by the power adapter included in the delivery.
Please bear in mind that it is prohibited by law to monitor strangers with a camera without their
knowledge and consent. Observe the rules and regulations of the country where you are using
the camera.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Moreo-
ver, the improper use involves risks such as short-circuits, fire, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Radio camera
• Bracket
• Installation material (4x screws, 4x wall screw-plugs)
• Antenna
• AC adapter
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in these operating
instructions which absolutely have to be observed.
The arrow symbol is used when specific tips and information on the operation are
provided.
Observe the operating instructions!
Safety Instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General information
• For safety and approval reasons, unauthorised conversion and/or modifications to
the product are not permitted. Do not disassemble the product.
• The product is not a toy and should be kept out of the reach of children. Install and
use the product where it is out of the reach of children.
• Do not use this product in hospitals or medical institutions. The transmitted signals
might cause interference with the function of life-support equipment. The same
may also apply to other areas.
• Handle the product with care; it can be damaged by impacts, blows or falls even
from a low height.
• If you discover that the product is damaged, do not use it any longer and take it
to a specialised workshop or dispose of it in an environmentally friendly manner.
