Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or a
specialist repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Electrical safety
• The mains outlet must be located near to the device and be easily accessible.
• Only use the supplied mains adapter as a power source.
• Only connect the power adapter to a standard mains socket connected to the
public grid. Before plugging in the power adapter, check whether the voltage
stated on the power adapter complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable;
always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during
storms.
• The power adapter is constructed with protection class II.
• Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Switch off the mains voltage to the mains socket to
which the power adapter is connected (switch off at the corresponding circuit
breaker or remove the safety fuse, then switch off at the corresponding RCD
protective switch, so that all poles of the mains socket are disconnected). Then
unplug the power adapter from the mains socket. Dispose of the faulty power
adapter in an environmentally friendly way and discontinue use. Replace it with a
power adapter of the same design.
•
Never pour any liquids over electrical devices or put objects filled with liquid next
to the device. If liquid or an object does enter the interior of the device, power
down the respective socket (e.g. switch off the circuit breaker), and then unplug
the mains plug from the mains socket. Discontinue use and take the product to
a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. In
addition, the power adapter may cause a fatal electric shock! Allow the product to
reach room temperature before connecting it to the power supply and putting it to
use. This may take several hours.
c) Persons and product
• Do not cover any of the ventilation grilles, otherwise the device may not cool
properly.
•
Ensure that there is sufficient ventilation. Do not cover the device housing!
Operating instructions
Wireless HDMI stick with receiver
Item no. 1499829
Intended use
This wireless set is designed to transfer an HDMI signal from a video output device (e.g. PC,
DVD player or Blu-Ray player) to a display device (e.g. TV or monitor). The receiver is powered
by a power adapter, which is included with the product. The transmitter is powered via a USB-Y
cable connected to two USB ports (see "Technical data").
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
Do not attempt to rebuild and/or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuits, fire and electric shocks.. Read the instructions carefully
and keep them. Make this product available to third parties only together with its operating
instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Restrictions
The following countries impose restrictions on the use of the product:
DE
AT
NL
SE
PL
SK
SI
LT
EE
LV
FI
FR
UK
BE
CZ
HU
IT
ES
PT
EL
DK
BG
CY
HR
IE
IS
LU
MT
RO
The product must only be operated indoors.
Delivery content
• Transmitter stick
• Receiver box
• HDMI cable (15 cm long)
• USB-Y power cable (60 cm long)
• Power adapter
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads, or scan the QR
code above. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
This symbol indicates particular hazards associated with handling or operation.
The “arrow” symbol indicates special tips and operating information.
The product must only be used in dry, enclosed indoor areas. This product must not
become damp or wet, as this may result in a fatal electric shock!
This symbol indicates that this product is built according to protection class II. The
product is equipped with reinforced or dual insulation between the mains circuit and
the output voltage.