Renkforce 1423363, Руководство по эксплуатации, Страница: 57 / 132

57
h) Setting the barometer
• To switch the barometer unit, push the button “ BARO ” ( B3 ) in normal mode. It is lo-
cated at the rear below the battery compartment lid. The unit is switched through in
the sequence “ hPa ”, “ inHg ” and “ mmHg ” and displayed accordingly as well ( C5 ).
• To switch the display between relative and absolute, keep the button “ BARO ” ( B3 )
pushed for approx. 2 seconds.
• Use the button “
+/CHANNEL
” (
A7
) or “
-/MEM
” (
A8
) to switch between relative “rel”
and absolute “abs”. The current setting is displayed again ( C4 ).
• To store the setting, push the button “ BARO ” ( B3 ) again.
i) Displaying and deleting the max. and min. values
• Briefly push the button “ -/MEM ” ( A8 ) to display the stored maximum and minimum
values in sequence. At the upper right of the display, you will see whether it is the
minimum value “
MIN
” or the maximum value “
MAX
”. The order is:
Max. outdoor temperature; min. outdoor temperature; max. indoor temperature; min.
indoor temperature; barometer max.; barometer min.
• While looking at the individual maximum and minimum values, keep the button
“ -/MEM ” ( A8 ) pushed for approx. 3 seconds to delete the respective value.
j) Displaying the Values of the Last 24 Hours
• Briefly push the button “ HISTORY ” ( A9 ) to display the values of the past 24 hours.
Every push will switch the display to the next value (indoor temperature, outdoor
temperature and barometer).
• If no button is pushed for 5 seconds, the display will automatically return to normal
mode.