• Do not look straight into the light rays during operation. The light rays
could cause visual problems. For epileptics particularly, epileptic seizures
could be triggered under certain circumstances.
• Use caution when mounting or cleaning the product. The edges of the
mirror ball are very sharp. Risk of injury!
• Do not touch the mirror ball while it is rotating.
• Do not operate the product without supervision.
• The mains outlet must be located near to the device and be easily
accessible.
• As power supply, only use the supplied mains adaptor.
• Only connect the power adaptor to a normal mains socket connected to
the public supply. Before plugging in the power adaptor, check whether
the voltage stated on the power adaptor complies with the voltage of your
electricity supplier.
• Never plug in or unplug the mains plug when your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the
cable; always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled
in them. This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket
during storms.
• Unplug the mains plug from the mains socket if you do not use the device
for an extended period of time.
• Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation generated could destroy the
product. Allow the device to reach room temperature before connecting
and using it. This may take several hours.
• Never pour liquids over electric devices and never place liquid-filled
objects near the device. If liquid or an object enters the interior of the
device nevertheless, first power down the respective socket (e.g. switch
off circuit breaker) and then pull the mains plug from the mains socket.
Do not operate the product anymore afterwards, but take it to a specialist
workshop.
• The use of electrical devices must be supervised by trained staff in
schools, training centers, hobby and do-it-yourself workshops.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Installation
You may mount the product to a ceiling using the bracket located at the
bottom.
Alternatively, you may place it on a flat, even surface.
Make sure that the product can not fall down in any circumstance. This
poses a risk of injury and product damage!
If mounted to a ceiling:
Secure the product with an additional safety rope, which is independent of
the main suspension device.
Make sure no persons can enter the area below the product.
The product should never be a part of a free-swinging system.
Make sure the mounting point can support the weight of the product.
Make sure the mirror ball can rotate freely. It must not come into contact
with other surfaces or objects.
Never install the product in the vicinity of combustible materials (e.g.
curtains, decorative materials, etc.). Maintain sufficient space around the
product with good air circulation.
Operating instructions
LED mirror ball station
Item no. 1407923
Intended use
The product is intended for creating decorative lighting effects. It can be placed on a
flat surface or mounted to a ceiling. Power is supplied via the included power adapter.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• LED mirror ball station
• Power adapter
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can
download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
