51
Switching the sound signal at pushing of a button on/off („Beep“)
• Use the buttons „
“ (7) and „
“ (9) to select if the surveillance camera is
to issue a brief sound signal at each push of a button or not.
• Press the „OK“ button (8) to confirm.
Resetting to factory settings („Restore Default“)
• Use the buttons „
“ (7) and „
“ (9) to select if the surveillance camera is
to be reset to factory settings or not.
• Press the „OK“ button (8) to confirm.
Display firmware version number („Version“)
• After calling the function, the firmware version number of the surveillance
camera is displayed.
• Push the button „OK“ (8), to return to the function selection.