Operating instructions
4 Port USB 2.0 OTG hub
Item no. 1268679
Intended use
This product is intended for connection to an Android smartphone or tablet that
supports OTG. It is designed to read and write to memory cards or USB sticks using
Android. In addition, a mouse and keyboard can be connected. The attached micro
USB cable provides the connection and the supply voltage. Due to the limitations of
the Android operating system, a maximum storage capacity of 32 GB is supported.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
•
OTG hub
•
Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
•
Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
•
Also observe the safety and operating instructions of any other devices
which are connected to the product.
•
Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
•
If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Connection, setup and operation
•
Connect the OTG hub to the micro USB port on your Android device. The operational
status indicator turns on.
•
You can now insert USB peripheral devices such as a mouse, keyboard or a USB
stick or a card reader for memory cards. Android automatically recognises the
storage device or other devices. The mouse or keyboard can be used straight away.
The file browser is opened automatically when a memory card or stick is inserted.
•
It is also possible to combine devices and storage media. However, this is limited by
the maximum current that can be delivered by your smartphone or tablet. Only one
storage medium can be read and written to at the same time.
Some USB devices have a higher current consumption than mobile devices.
They cannot be connected to the OTG hub.
External HDDs cannot be used.
•
Before removing a device, USB stick or memory card, it should be safely removed
within the operating system. Failing to do so may damage your data or the storage
device. (Refer to the operating instructions for your Android device)
Maintenance and cleaning
Never use aggressive detergents, rubbing alcohol or other chemical
solutions, as these could damage the housing or even impair the
functioning of the product.
• You do not need to carry out maintenance work on the product. Repair or
maintenance work must only be carried out by a specialist or a repair centre. Under
no circumstances should you service any of the components in the interior of the
product, therefore never open it.
•
Disconnect the USB cable and your connected mobile device from the product
before cleaning.
•
Do not immerse the product in water.
• A dry, soft and clean cloth is sufficient for cleaning the exterior. Do not press too
hard on the housing as this can lead to scratch marks.
•
Dust can be easily removed using a soft and clean long-haired brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply .......................................via USB
Operating voltage................................5 V/DC
Current consumption ..........................max. 500 mA
Supported operating system .............Android 4.x and above
Supported file system
.........................FAT32
Storage limit .........................................max. 32 GB
Connections .........................................
1 x USB2.0 (Micro USB plug),
4 x USB2.0 (USB hub)
Operating conditions ..........................
0 to +60 °C, 20 - 80 % RH
Storage conditions..............................
-20 to +60 °C, 10 - 95 % RH
Dimensions (W x H x D)......................67 x 21 x 31 mm
Cable length .........................................140 mm
Weight ...................................................23 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V1_0115_02-DS
