RS-MG41-O3Ozone gas detector user manualV1.1
Shandong Renke Control Technology Co., Ltd.
www.renkeer.com
10
6.Instructions for configuring the software
After the software is installed, it will be generated on the desktop“
”Icon, double
click to open the software.
6.1 Set detection parameters
Connect the device to the computer via a USB data cable, click "Read Device Information" on the
toolbar, and click "Write Device Information" after editing the device parameters to write the
parameters to the device.
It should be noted that after the modified parameters, check the modified parameters, and
then click to write the device information, the parameter will be written to the device, this function
is to facilitate the modification of other parameters by mistake Set.
