TONiC RESM20 Functional Safety installation guide and safety manual Original instructions
4
Certification
Under the terms of CSA SIRA Functional Safety Certificate SIRA
CASS00023/01
, for the management and
self-certification of functional safety activities up to SIL3/PLd:
Renishaw plc declares that the products listed by this installation guide meet the requirements of:
BS EN IEC 61508-1:2010, BS EN IEC 61508-2:2010 and BS EN IEC 61508-3:2010
BS EN 61800-5-2:2017 (IEC 61800-5-2:2016)
BS EN ISO 13849-1:2015 and BS EN ISO 13849-2:2012
when used as an element/subsystem in safety related systems performing safety functions requiring up to
and including:
SIL2 with HFT = 0 (1oo1)
Category 3, PLd.
TONiC FS encoder system
Functional Safety Certificate No. FSC001
SIL2
FUNCTIONAL
SAFETY
PLd
EU declaration of conformity
Renishaw plc declares under its sole responsibility that the products identified below are in conformity with
all relevant Union legislation.
Name
Description
Product Name:
TONiC FS encoder system
Description:
TONiC optical encoder system, that is FS certified
Part no.:
T3xxx (Linear); T4xxx (Rotary)
Valid from:
Serial number 2AHF37
Serial number 2AHF79
The products comply with EU directives:
and comply with the following technical standards:
2014/30/EU
Electromagnetic compatibility (EMC)
2011/65/EU
On the restriction of the use of certain hazardous substances
inelectrical and electronic equipment (recast)
BS EN 12100:2010
Safety of machinery. General principles for design.
Risk assessment and risk reduction
BS EN 61010-1:2010
Safety requirements for electrical equipment for measurement,
control, and laboratory use
Part 1: General requirements
BS EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use.
EMC requirements. General requirements
Immunity to Table 2 - Industrial electromagnetic environment
Emissions to Class A - Industrial electromagnetic environment
BS EN 62471:2008
Photobiological safety of lamps and lamp systems
BS EN IEC 63000:2018
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
The persons authorised to compile the technical file and issue the declaration of conformity are:
Steve Oakes, Director & General Manager, Encoder Products Division
Martin Curtis, Regulatory Compliance Manager, Encoder Products Division
Renishaw plc, New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR, United Kingdom
Signed: M. Curtis
Dated: 30/09/2019
Place: Wotton-under-Edge
Reference no. EUD 2019-003