Renishaw TONiC diagnostic kit, Руководство пользователя, Страница: 8 / 16

TONiC diagnostic kit
User guide
6
3.1. Connecting the system
Choose the appropriate interconnect cabling for your system from the options below and connect the TONiC readhead to the dongle.
3.1.1. TONiC with a digital Ti interface (Ti0004 - Ti4000)
 Items required for connection:
• Item 1, dongle
• Item 3, USB cable
 Connect the TONiC readhead to the Ti interface. See the relevant TONiC installation guide for details of connecting the
readhead to the Ti interface (System connection).
 Connect the output of the Ti interface to the input of the dongle
 If using the diagnostic dongle ‘in-line’ connect the output of the dongle to the customers’ controller
 Proceed to section 3.2. (‘3.2. Starting the software’, page 7)
TONiC
User guide
Item 1
3.1.2. TONiC with digital Ti interface (Ti10KD or Ti20KD) or analogue Ti interface (Ti0000)
NOTE:
Ti0000, Ti10KD and Ti20KD are not compatible with the diagnostic dongle so the system should be connected using the
dongle interface
 Items required for connection:
• Item 6, sacrificial interconnect PCB for TONiC or ATOM cabled readheads.
• Item 5, Interface cable for TONiC or ATOM readheads.
• Item 2, dongle interface.
• Item 1, dongle.
• Item 3, USB cable.
 Do not connect the readhead to the interface.
 Connect the sacrificial interconnect PCB to the JST connector on the interface cable (Item 5).
 Connect the mini PCB on the cabled TONiC readhead to the sacrificial interconnect PCB for cabled readheads (Item 6).
Ensure correct orientation of the connector, both cables will come out of the same side of the pcb.
 Open the cover plate on the dongle interface (Item 2) and connect the mini PCB into the interface.
See the relevant TONiC installation guide for details of connecting the readhead to the dongle interface (System connection).
 Connect the output of the dongle interface to the input of the dongle (Item 1).
 Proceed to section 3.2 (‘3.2. Starting the software’, page 7)
NOTE: The dongle interface/Ti interface connector is not designed for multiple insertions and removals.
The sacrificial interconnect PCB’s should be used and replaced when worn or damaged.
Item 6 Item 5 Item 2 Item 1
Readhead Interface Section
TONiC Ti0004 - Ti4000 3.1.1.
TONiC
Ti0000
Ti10KD
Ti20KD 3.1.2.