Safety
Before unpacking and installing the RFP system, the user should carefully read the safety instructions below and ensure that they are followed
at all times by all operators.
The RFP system should only be used with the REVO-2 head.
Operators must be trained in the use and application of the REVO-2 system and accompanying products, in the context of the machine it is
fitted to, before being allowed to operate that machine.
Permanent magnets are used in some components of the REVO-2 system and associated products. It is important to keep them away from
items which may be affected by magnetic fields, e.g. data storage systems, pacemakers and watches.
WARNING:
Avoid touching the probe (including counter balance arms) when attached to the REVO-2 head, especially when it is
engaged (servo LED green) and the system is ready for measurement. If contact is made with the hardware, the tool will need to be
reconfigured before continuing.
RFP1 probe LED emissions
The RFP1 probe incorporates high power LED lights and should not be used in the event of serious damage to any part of the probe. In such
cases immediately disconnect the power source, remove and do not attempt to reuse the parts. Contact your supplier for advice.
CAUTION:
This equipment uses LED illumination that may flash at a variable rate. Avoid exposure or seek advice from your
medical practitioner if you are susceptible to photosensitivity or related health effects.
RFP1 user's guide
www.renishaw.com
Issued 06 2022
7
