Renishaw RENGAGE RMP400, Быстрый старт

Страница: 19 / 46

17

LED check
3
> 5 s
2
1
×
Battery status
Battery good
or
Battery low
Placing the probe in configuration mode
To change the switch-on method,
go to the next page.
Deflect the stylus and hold it
deflected until after the battery
status has been displayed at the
end of the review sequence.
Key to the symbols
LED short flash
LED long flash
Deflect the stylus for less than
4 seconds to move to the next menu
option.
Deflect the stylus for more than
4 seconds to move to the next menu
option.
To exit, leave the stylus untouched
for more than 120 seconds.
To exit, leave the stylus untouched
for more than 20 seconds.
CAUTION:
Do not remove the batteries whilst in configuration mode.
To exit, leave the stylus untouched for more than 20 seconds.