manualshive.com logo in svg

Renishaw MIH, Руководство пользователя

Поделиться
Скачать
Renishaw MIH Скачать руководство пользователя страница 41

39

The LCD/software facility

6.6 

Using a sequence

When using a sequence, the only requirement is to position the 
MIH following the axis direction arrows and lock up once the correct 
position is reached. On unlock, the sequence will automatically 
increment to the next step and the direction arrows will indicate the 
direction each axis must be rotated to, in order to achieve the position 
stored in that step.

Step 1

To use a sequence, either press the M- button from the ‘USE Ed’ 
display or the M+ button from the ‘End USE’ display. Either of these 
actions will automatically start the sequence at step 1. The memory 
contents of sequence step 1 are displayed and the fl ashing direction 
arrows indicate the direction in which each axis must be rotated to 
achieve the position stored in sequence step 1. If the head is already 
in this position, the position confi rmation block will be displayed.

If the head is not in this position, unlock the head and follow the 
direction arrows. The display will show live positional data and the 
position confi rmation block will confi rm when the correct position has 
been reached.

Содержание MIH






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды