Renishaw Equator EQ-ATS, Руководство по установке

Страница: 6 / 20

6
Safety and warnings (continued)
Care should be taken when handling this product. If the product is dropped or receives an impact, it must be assumed that it is
not suitable for use and Renishaw should be contacted with reference to a replacement.
Safety shoes and glasses should be worn at all times during installation and use of the EQ-ATS.
The Equator foot stud installation kit, included with the EQ-ATS, must be used to secure the Equator gauging system onto a
fixed surface to ensure stability during use.
The weight of the 500 mm ATS is 12.3 kg. The weight of the 500 mm ATS with packaging is 16.1 kg.
The weight of the 800 mm ATS is 14.5 kg. The weight of the 800 mm ATS with packaging is 18.6 kg.
The CE mark and serial number are located on the control box (C).
When connecting or disconnecting the EQ-ATS to an Equator system, the Equator system must be shut down and
disconnected from the mains power supply. Not doing so can cause damage to the electronics.
Users should ensure that parts are fixtured securely to the EQ-ATS before using the machine.
Please be aware of the potential pinch point between the EQ-ATS fixture plate (D) and the Equator support strut (F).
If the EQ-ATS is installed with the cantilevered cylinder (B, below) above a table or other surface. The bumper (A) should be
removed to eliminate a potential pinch point from someone leaning on the surface between the fixture plate (D) and bumper
(A). Please see page 15.
!
Item Description
A Bumper
B Cylinder
C Control box
D Fixture plate (M6, M8 or 1/4”)*
E Base plate
F Support strut
E
D
A
B
C
* M6, M8 and 1/4” fixture plates are orderable seperately
F