manualshive.com logo in svg

Renfroe TL, Руководство по применению, эксплуатации и обслуживанию

Поделиться
Скачать
Renfroe TL Скачать руководство пользователя страница 18

Maintenance Program for Renfroe Clamps Manufactured from Steel  

 

 

The severity of service to which the clamp is subjected in the work place 
determines the frequency and type of inspection procedure required for 
the clamp. The frequency  and type of inspection is determined by the 
clamp owner.  Renfroe acknowledges the ASME B30.20 safety standard 
which sets forth minimum inspection requirements for “Below-the-Hook” 
lifting devices and the Renfroe Recommended Inspection Schedule 
meets and/or exceeds the ASME inspection recommendations. 

 

Before using a clamp operators should be trained by a qualified 
person to visually inspect a lifting clamp that will include but not be 
limited to the following: 

 

Every lift Inspection: 

 
A.  A visual inspection by the operator before and after each lift made by 

the clamp. 

 

B.  Check the clamp to be certain the identification and warning tags are 

present and legible.  

 
C.  Do not use the clamp if the tags are missing or illegible. 
 
D.  Inspect gripping surfaces for wear and defects.  Gripping surfaces 

must be sharp and free of foreign matter. 

 
E.  Inspect condition of body for wear, damage and distortion, particu-

larly in the area of the jaw opening. 

 
F.   Inspect lifting shackle and all pins for wear and damage. 
 
G.  Lock spring must have definite amount of tension when the lock is 

moved to the “Lock Closed” position without material in the clamp.  
Lock Pawl must rest on body spacer sleeve. 

 
H.  On the model “TLA” the auxiliary lock button must have a positive 

spring action that projects it out to engage the lock handle when the 
handle is moved to the “Lock Closed” position. 

 
I.   Remove any clamp from service in need of repair. 
 

 

 

Содержание TL


























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды