manualshive.com logo in svg

Renfroe LPA, Руководство по применению, эксплуатации и обслуживанию

Поделиться
Скачать
Renfroe LPA Скачать руководство пользователя страница 19

Model LPA Periodic Inspection Procedures 
 

Step 1. Verify the identity of the clamp by checking the I.D. plate on the 
clamp body. If the I.D. plate is missing or not legible an RFID chip 
(Radio Frequency Identification Device) is embedded in the clamp body 
or a clamp component. If the I.D. plate is missing and the RFID chip is 
unavailable call the Renfroe factory for instructions on returning the 
clamp for recertification. Refer to Exploded View for parts break down. 
 
Step 2. 
Completely disassemble clamp. 

 

Step 3. Remove all dirt, grease and other matter that may inhibit proper 
inspection of the clamp body or clamp components. 
 
BODY 
A.  Inspect welds for fractures. RENFROE recommends a dye pene-

trant or similar method of detecting indications on the clamp. If an 
indication is found it may be necessary to use a magnetic particle, 
ultrasonic or similar methods for determining damage to the clamp 
or components. Inspect all pin holes for wear and elongation. 

B.  Inspect inside jaw opening for displaced metal and distortion. 
C.  Inspect clearance of lock handle assembly mounting hole for wear. 

Clearance with shaft of lock handle assembly should be minor. 
Mounting holes that are worn, oversized may cause the lock handle 
to malfunction. Refer to exploded view. 

 

WARNING: Replace clamps containing fractures, elongated pin 
holes, worn or elongated swivel jaw center block hole, distorted 
jaw openings, clamp bodies with worn and/or rough shackle pin 
guide slots and/or a jaw opening with displaced metal. 

 

Step 4. 
LIFTING SHACKLE LPA-1 
A.  Inspect lifting shackle eye for elongation and wear at point where 

eye engages sling attachment. 

B.  Inspect shackle pin hole for wear and elongation. 
C.  Inspect shackle body for bending.  
D.  Inspect shackle pivot pin, mounting holes and retaining spiral pins. 

Elongated shackle eye indicates overloading. Elongated shackle pin 
holes indicate wear and possible overloading. Bent shackles indi-
cate excessive side-loading. 

WARNING: Replace shackles that are bent, show excessive wear 
at eye, or have elongated eye and/or shackle pin hole. 

Содержание LPA

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды