15
1.800.627.4499
HE-Series Outdoor
ERV
SHIPPING/RECEIVING
4/22/09 MF
SPECIFICATIONS SUBJECT
TO CHANGE WITHOUT NOTICE.
RenewAire LLC
Scale: 1" = 24"
Do not scale drawing
HE1.5X-RT_CORNER_WEIGHTS_
JAN19.dwg
HE1.5XRT Corner Weights
RR
RF
LF
UNIT COG
RANGE
BASIC UNIT WEIGHTS (lbs.)
Motors
UNIT
LF
LR
RR
RF
.75 HP
394
94
81
102
117
ADDITIONAL WEIGHTS FOR OPTIONS (lbs.)
Motors
UNIT
LF
LR
RR
RF
Double Wall
110
26
23
28
33
VFD'S
8
2
2
2
2
RA or EA Damper
18
7
7
2
2
OA or FA Damper
18
7
7
2
2
Total Selected Weights
Add the additional weights for options to the Basic Module weights
determined by motor size to determine Module and Corner weights for a
specific unit.
Corner weights shown above include weatherhoods INSIDE THE UNIT, as
shipped.
Center of gravity: From Left (A) =25", From Front (B) = 16" (+/- 2")
30.37"
Mounting
Leg Pitch
43.46" Mounting Leg Pitch
MAY18- MHK
266.39
186.
16
LR
1/2/19 MHZ
B
A
FIGURE 3.2.0 HE1.5XRT WEIGHTS AND COGS
3.3 RECEIVING
Upon receipt of the HE1.5XRT, inspect the unit for obvious external damage. If damage is
observed, take digital pictures and report the damage to your RenewAire representative. Note
the damage on the carrier’s Bill of Lading. Depending on expected transport and storage
conditions, the unit may have only the duct openings covered, it may be stretch-wrapped or it
may be crated. Do not unwrap the unit at this time. The unit will normally be moved to its final
location while still wrapped and attached to its pallet.
The preferred method of hoisting the HE1.5XRT from the carrier truck is by using a construction
forklift or a crane.
Once the unit is unwrapped, prevent dirt and debris from entering the cabinet by covering any
duct openings that do not have attached dampers. Keep the duct openings covered until it’s
time to connect ductwork.
3.4 STORAGE
Units that must be stored prior to installation should be left on their pallets and protected from
weather and physical damage. Units must be placed on a level surface to prevent wracking of
the pallet and the HE1.5XRT. All access doors must be secured with all available hardware (door
latches and securing bolts) and all openings into the cabinet must be sealed to prevent entry of
dust, dirt and debris.
4/22/09 MF
SPECIFICATIONS SUBJECT
TO CHANGE WITHOUT NOTICE.
RenewAire LLC
Scale: 1" = 24"
Do not scale drawing
HE1.5X-RT_CORNER_WEIGHTS_
JAN19.dwg
HE1.5XRT Corner Weights
RR
RF
LF
UNIT COG
RANGE
BASIC UNIT WEIGHTS (lbs.)
Motors
UNIT
LF
LR
RR
RF
.75 HP
394
94
81
102
117
ADDITIONAL WEIGHTS FOR OPTIONS (lbs.)
Motors
UNIT
LF
LR
RR
RF
Double Wall
110
26
23
28
33
VFD'S
8
2
2
2
2
RA or EA Damper
18
7
7
2
2
OA or FA Damper
18
7
7
2
2
Total Selected Weights
Add the additional weights for options to the Basic Module weights
determined by motor size to determine Module and Corner weights for a
specific unit.
Corner weights shown above include weatherhoods INSIDE THE UNIT, as
shipped.
Center of gravity: From Left (A) =25", From Front (B) = 16" (+/- 2")
30.37"
Mounting
Leg Pitch
43.46" Mounting Leg Pitch
MAY18- MHK
266.39
186.
16
LR
1/2/19 MHZ
B
A
