Renesas SmartBond UM-B-041, Руководство пользователя

Страница: 53 / 170

UM-B-041
SmartBond Production Line Tool
User Manual Revision 4.8 02-Nov-2022
CFR0012 53 of 170
© 2022 Renesas Electronics
Table 19: Device IC
Option Description
Device IC The Renesas Bluetooth
®
LE chipset used in the device under test.
7.2.2.3 Active DUTs
Figure 33: Active DUTs
Enables or disables the testing for each DUT. Table 20 describes the available options for the Active
DUT .
Table 20: Active DUTs
Option Description
DUT1-16 Enables the specific DUT device placed on connector DUT1-DUT16.
7.2.2.4 DUT COM Ports
Figure 34: DUT COM Ports
This field shows the Windows COM port assigned to each DUT. The table is filled only when the '
COM
Enum
' action has been performed by the CFG or the GUI PLT applications, or when non-zero entries
exist in the
com_port_x
params.xml options. When the '
COM Enum
' action is performed, the tools will
automatically find the DUT COM ports and save them in the
params.xml
file. These values will be
read by the CFG PLT application and be displayed here. When a '
COM Enum
' action has not been
performed, the GUI PLT will automatically run it once in every first test execution.
Note: Great care must be taken when the
params.xml
file is shared across different test stations,
where different DUT COM Ports will probably exist. The '
COM Enum
' action should then be performed
again, so the new COM ports of the new PC system are identified and updated in the XML file.
Table 21 describes the available options for the DUT COM Ports .
Table 21: DUT COM Ports
Option Description
DUT1-16 Shows the Widows COM port assigned to a specific DUT.
Reset Sets all values to zero.