Smart Analog IC101
Smart Analog Easy Starter 101 Tutorial (RL78/L13)
R21AN0011EJ0100 Rev.1.00
Page 16 of 18
Nov 01, 2014
After confirming operations as instructed above, confirm the change in waveform by changing the SAIC101 settings.
First, change the value of AIN2OFT in the Chip Config window (sect. 7.3) to 1. This value is used to adjust the offset
voltage. By changing AIN2OFT from 2 to 1, the offset voltage changes from -153.13 / G
SET1
[mV](G
SET1
=1) to -164.06 /
G
SET1
[mV] (G
SET1
=1).The effect of the changed setting can be confirmed in the ADC Graph window waveform.
Figure 7-10
Operation Confirmation After Setting Change
Change AIN2OFT
value from 2 to 1
Change in AIN2OFT
value from 2 to 1
